Autel MSULTRA + ADAS

Description

Autel MaxiSYS MSULTRA + ADAS ÔÇö Complete Diagnostic and ADAS Calibration Solution

Combining Autel’s top-of-the-line diagnostic tablet with an activated ADAS software upgrade, the Autel MaxiSYS MSULTRA + ADAS gives your shop one comprehensive tool capable of everything from pulling a check engine code on a 2010 Corolla to performing a forward collision camera calibration on a 2024 F-150 following windshield replacement. Priced at $6,690, this package is built for shops that are ready to bring ADAS calibration work in-house rather than sending it out.

At the top of Autel’s MaxiSYS tablet lineup sits the MSULTRA. Powered by an octa-core processor running at 2.3GHz and 1.7GHz, it comes equipped with 256GB of onboard storage and a 12.9-inch touchscreen delivering 2732├ù2048 resolution ÔÇö spacious enough to run split-screen applications side by side, a genuine advantage when you need to compare live data against a waveform during a drivability diagnosis. The 18,000mAh battery supports roughly 8 hours of continuous operation.

MaxiFlash VCMI ÔÇö 5-in-1 Vehicle Communication Interface

The VCMI (Vehicle Communication and Measurement Interface) consolidates what previously required several separate tools. It handles all of the following functions in a single unit:

• VCI (Vehicle Communication Interface): Full J2534 pass-through for module flashing, with support for DoIP, D-PDU, CAN FD, and Mega CAN protocols ÔÇö covering late-model vehicles that demand OEM software for module programming.
• 4-Channel Oscilloscope: Built-in preset guided tests and a waveform library make it practical for diagnosing injector circuits, ABS sensors, cam/crank correlations, and related issues without reaching for a separate lab scope.
• Digital Multimeter: Fully integrated within the same device.
• Waveform Generator: Supports component activation and circuit testing.
• CAN BUS Tester: Network diagnostics with no additional hardware required.

The VCMI uses dual Wi-Fi ÔÇö one channel holds the vehicle link while the other keeps you connected to the shop network at the same time. That simultaneous connectivity is valuable when you’re pulling remote service data or transmitting a pre/post-scan report without dropping your vehicle connection.

Diagnostic Software Depth

• Coverage: More than 80 vehicle brands spanning passenger cars through Class 6 medium trucks ÔÇö domestic, Asian, European, and specialty makes including FCA, Ford, GM, Mercedes-Benz Sprinter, Tesla, and others.
• Topology Module Mapping: On supported vehicles, a color-coded all-system network map displays which modules are communicating and which are showing faults before you run individual system scans.
• Intelligent Diagnostics: DTCs are linked to relevant TSBs, guided repair procedures, a repair tips video library, and fault code analysis specific to each DTC ÔÇö cutting time spent chasing codes that already have documented solutions.
• Secure Gateway Access: Comes with an AutoAuth account for FCA Secure Gateway Module (SGM) access, which is required for module communication on 2018+ Chrysler/Dodge/RAM/Jeep vehicles.
• ScanVIN: Reads VIN through barcode scan or camera-based text recognition for faster vehicle identification at intake.
• Pre-Scan / Post-Scan Reports: Records a full vehicle DTC and health status snapshot before and after repairs, providing the documentation needed for ADAS calibration validation ÔÇö a requirement increasingly demanded by insurers and OEM repair standards.

ADAS Calibration Capability

This package includes the ADAS software upgrade, which activates complete ADAS calibration functions across 80+ vehicle brands. Both static and dynamic calibration procedures are covered for:

• Forward-facing cameras (lane departure, forward collision warning, automatic emergency braking)
• Radar sensors (adaptive cruise control)
• Blind-spot monitoring systems
• Around-view monitor (AVM) cameras
• Night vision systems (on supported vehicles)

ADAS calibration is a required step following windshield replacement, front-end collision repair, suspension alignment changes, or any sensor removal and reinstallation that disturbs a calibrated component. Without this software capability, that revenue leaves your shop. With it, you’re keeping and billing that work yourself.

Note: The MSULTRA + ADAS software activates the calibration procedures on the tablet itself. Static calibrations also require the appropriate calibration frame and targets ÔÇö CSC frame, IA800/IA900WA, or MA600 mobile frame depending on the vehicle and repair type. These are sold separately. Contact us to determine which frame configuration best matches your bay space and vehicle mix.

Who This Package Is For

• Independent shops performing ADAS work: If your shop is already referring out windshield replacements, alignment jobs, or front-end repairs on late-model vehicles, you’re losing calibration revenue with each job. This package keeps that work ÔÇö and that billing ÔÇö in your bay.
• Shops with medium truck customers: Combined Class 6 and passenger car diagnostic coverage in a single tool isn’t the norm. If your lifts see Sprinters, Ford Transits, and box trucks alongside everyday commuters, the MSULTRA handles the full range.
• Shops requiring J2534 module flashing: CAN FD and DoIP protocol support means the VCMI handles programming tasks where older VCIs fall short. Late-model GM, Ford, and Stellantis platforms specifically require this capability.
• High-volume shops that need solid documentation: Pre/post-scan reporting paired with ADAS validation records is increasingly a shop liability consideration. The MSULTRA’s built-in reporting workflow addresses this directly.

What’s in the Box

• MaxiSYS MSULTRA tablet (12.9-inch, 256GB, octa-core)
• MaxiFlash VCMI 5-in-1 device
• Docking station
• OBD-II cables and connectors
• Oscilloscope scope connectors
• Hard carrying case
• 1-year warranty and software subscription
• ADAS software upgrade (activated)

Technical Specifications

• Display: 12.9-inch IPS touchscreen, 2732 ├ù 2048 resolution
• Processor: Octa-core, 2.3GHz + 1.7GHz
• Storage: 256GB
• Battery: 18,000mAh, approximately 8 hours continuous use
• Cameras: 16MP rear, 5MP front
• Operating System: Android
• Communication Protocols: DoIP, D-PDU, CAN FD, Mega CAN, J2534
• VCMI Functions: VCI, 4-channel oscilloscope, multimeter, waveform generator, CAN BUS tester
• Connectivity: Dual Wi-Fi (simultaneous vehicle + network)
• Vehicle Coverage: 80+ brands, passenger to Class 6 medium truck

Why Buy From ADAS Calibration Tools?

We’ve focused exclusively on professional diagnostic equipment. When you reach us, you’re talking to someone who knows the practical difference between a static and dynamic calibration, understands which frame pairs with which vehicle, and can help you determine whether this package genuinely fits your shop’s workflow before you commit $6,690. We provide free shipping, free technical support before and after the sale, and the full manufacturer warranty ÔÇö no grey-market units, no expired software. If a different configuration makes more sense for your situation, we’ll tell you honestly.

Call 800-123-4567 for quick answers and help!