Autel IA700 ADAS All-Systems Calibration System with MS909 Tablet

Description

Autel MaxiSYS IA700AST ÔÇö All-Systems ADAS Calibration with Alignment Pre-Check and MS909 Tablet

The IA700AST is the fully equipped, all-systems IA700 bundle that ships with the MaxiSYS 909 S2 tablet included. Every component needed to calibrate any ADAS system type ÔÇö camera, radar, lidar, and night vision ÔÇö comes in a single package alongside Autel’s advanced full-featured diagnostic tablet. Among all IA700 configurations, this is the highest-capability option, making it the natural fit for collision centers, franchise dealerships, and full-service shops that need to handle any ADAS calibration job without gaps in coverage.

What’s Included

• IA700 Calibration Frame with robotic crossbar and 6 HD positioning/tracking cameras
• MaxiSYS 909 S2 tablet ÔÇö wireless VCI and J2534 pass-thru programming device
• ADAS calibration software upgrade card for static and dynamic calibration coverage
• LDW targets and patterns for Mercedes-Benz, Nissan, Infiniti, Hyundai, Kia, Toyota, Lexus, Mazda, Mitsubishi, Subaru, Volkswagen, Audi, and Alfa Romeo
• Target case
• Radar, lidar, and night vision calibrators (all-systems equipment)
• AVM (Around-View Monitoring) calibration mats
• Four tire clamps with camera targets
• Steering wheel lock, brake chocks, power supply, alignment aid, frame cover
• One-year Limited Warranty

Vehicle Coverage

The all-systems ADAS package is engineered to cover virtually every ADAS-equipped vehicle currently sold in the U.S. market:

• LDW camera calibrations for 13 vehicle brands with specific targets and patterns included
• Radar-based ACC and collision warning calibrations ÔÇö front and rear
• AVM (Around-View Monitoring) systems ÔÇö includes calibration mats for Nissan, Mercedes-Benz, Volkswagen, Honda, General Motors, Toyota, and Mitsubishi
• LiDAR and night vision systems on equipped vehicles
• Static and dynamic ADAS calibration methods for most U.S., Asian, and European ADAS-equipped vehicles

The MaxiSYS 909 S2 Tablet

The bundled tablet is far more than a limited ADAS controller ÔÇö it is Autel’s full-featured 9.7″ advanced diagnostic tablet with wireless VCI and J2534 pass-thru programming capability built in. Bi-directional active tests, special functions, coding and adaptations, 40+ service menu tasks, and topology module mapping are all supported. Within a single workflow and on a single device, technicians can complete a pre-scan, clear every fault, execute service resets, and generate documented post-calibration scan results.

IA700 Platform Core Features

Fully Optical Target Placement ÔÇö 6x Faster Than Mechanical

Six high-definition cameras embedded in the IA700 frame’s crossbar ÔÇö working in tandem with camera-equipped tire clamps ÔÇö optically determine the precise position of targets and patterns relative to the vehicle. The MaxiSYS tablet computes current angle, distance, and offset, presenting step-by-step adjustment instructions on screen. Green checkmarks confirm each parameter the moment correct positioning is achieved. The tape measure and manual measurement process is eliminated entirely ÔÇö Autel reports the optical approach cuts setup time by 6x compared to mechanical measurement methods.

Robotic Crossbar with Automatic Height Adjustment

Six HD tracking cameras housed in the removable crossbar continuously monitor tire clamp target positions. Robotic frame movement drives the crossbar to the correct vertical calibration height automatically, achieving 0.02┬░ accuracy ÔÇö the same specification as the IA1000. There is no manual cranking or estimated height-setting involved.

Integrated Wheel Alignment Pre-Check

Wheel alignment pre-check is included with every IA700 package. Prior to any ADAS calibration work, the system optically measures the vehicle’s live alignment specs and compares them to OEM tolerances. When the vehicle is within spec, the technician proceeds to calibration with documented confidence. When it falls outside tolerance, the system flags it immediately. This step is operationally critical ÔÇö vehicles with misaligned wheels produce inaccurate and potentially unsafe ADAS calibrations. The alignment pre-check generates a documented report confirming the vehicle met OEM tolerances before calibration was performed.

Unlevel Floor Compensation

Shop floors are rarely perfectly level, and mobile calibration environments introduce even more surface variability. The IA700 is built to compensate for these conditions ÔÇö the technician selects the surface type (level, unlevel, or on a rack) and the system accounts for it automatically. This capability eliminates calibration failures caused by floor conditions, which is a documented failure point for systems requiring a precisely level surface.

Quick Disassembly for Mobile Use

The IA700 breaks down into 5 primary components in under 90 seconds, enabling fast transport between bays or between shop locations. The included dust cover keeps the system protected during storage. For operations performing mobile ADAS calibration at dealerships, body shops, or fleet sites, the IA700’s portability is a measurable operational advantage over stationary-only systems.

Target and System Compatibility

All targets, patterns, and calibration components used by the IA700 are shared with Autel’s MA600 and IA900 systems. Shops already running an MA600 or IA900 can add an IA700 as a second calibration bay without investing in a second complete set of targets ÔÇö the existing targets work across both platforms. For MA600 users specifically, the IA700 brings optical positioning and alignment pre-check into the workflow, which represents a real upgrade in both setup speed and calibration accuracy.

Tablet Compatibility

The IA700 requires a MaxiSYS 909, MS919, or MS Ultra tablet paired with an ADAS calibration software upgrade card to enable static and dynamic calibration coverage. Packages carrying a “T” suffix ship with the MaxiSYS 909 S2 tablet already included; configurations without the “T” suffix require a compatible tablet to be sourced separately.

IA700 Package Lineup

• IA700 ÔÇö Frame only, alignment pre-check only (no tablet, no calibration targets)
• IA700T ÔÇö Frame + MaxiSYS 909 S2 Tablet (alignment pre-check + tablet, no ADAS targets)
• IA700LDW ÔÇö Frame + LDW targets (no tablet)
• IA700LDWT ÔÇö Frame + MaxiSYS 909 S2 + LDW targets
• IA700AS ÔÇö Frame + all-systems targets (no tablet)
• IA700AST ÔÇö Frame + MaxiSYS 909 S2 + all-systems targets

Why Buy the Autel IA700 ADAS All-Systems Calibration System with MS909 Tablet From ADAS Calibration Tools?

ADAS Calibration Tools has specialized in Autel ADAS calibration systems. We carry the complete IA700 package lineup and work with each customer to match the right configuration to their shop’s space, volume, and existing equipment. If you’re currently running an MA600 or IA900 and evaluating the IA700 as a complement or an upgrade, we can walk you through exactly what carries over and what changes. Every order includes free shipping, free technical support at 800-123-4567, and the full one-year manufacturer warranty ÔÇö along with straightforward guidance on the package that actually fits your operation.

Call 800-123-4567 for quick answers and help!