Autel MaxiSYS IA1000DT Automated ADAS Calibration Frame with Digital Targets

Description

Autel MaxiSYS IA1000DT ÔÇö Automated ADAS Calibration Frame with Digital Targets

The IA1000DT bundles the IA1000 calibration frame together with digital LDW targets ÔÇö three digital display monitors that automatically project the required calibration patterns. Note: this package does not include a MaxiSYS Ultra tablet or an IA1000 Activation Card; both must be sourced separately. This configuration is purpose-built for shops that already have a compatible Autel MaxiSYS Ultra tablet on hand and want to add digital target capability without paying for a redundant tablet in the box.

What’s Included

• IA1000 Calibration Frame (model AUTEL-CSC1000) with robotic crossbar and 6 HD cameras
• Digital Targets ÔÇö 3 Monitors ÔÇö auto-projects calibration patterns, no manual target selection
• Digital Target Activation Card

What You Need to Supply

• MaxiSYS Ultra Tablet (Ultra S2 or compatible Ultra series) ÔÇö sold separately
• IA1000 Activation Card ÔÇö required to activate ADAS calibration software on your tablet

If a compatible MaxiSYS Ultra tablet is not already part of your shop’s equipment, the IA1000TDT package includes the Ultra S2 tablet alongside the digital targets. For complete all-systems coverage, the IA1000ASTDT is the appropriate configuration.

IA1000 Platform ÔÇö Key Capabilities

Automated ADAS Targeting and Advanced Wheel Alignment

• 6 high-definition cameras (3072 x 2048 pixels each) paired with precision-engineered wheel clamp targets deliver 0.02┬░ accuracy ÔÇö the tightest tolerance available in this class
• 5-way robotic, automated forward-facing target placement ÔÇö the crossbar repositions itself to the correct location automatically, cutting setup time compared to manually adjusting a static frame
• Laser-guided Blind Spot, ACC, and AVM pattern positioning for accurate placement during radar and camera calibration
• Wheel alignment measurement goes beyond standard camber, caster, and toe ÔÇö full OEM-spec alignment data is captured before the workflow advances to ADAS calibration

Target Validation and OEM-Compliant Reporting

• Digital Go-No-Go confirmation ÔÇö if target placement falls outside specification, the system will not allow you to proceed. This is a hard stop, not an advisory warning, preventing calibrations from being performed on incorrectly positioned setups
• Validated target position data is captured in Pre/Post Scan reports ÔÇö producing insurance-ready documentation that confirms calibration was completed to OEM specifications
• Calibration procedures are drawn directly from OEM sources throughout ÔÇö not generic aftermarket alternatives

Diagnostics Integration

• Driven by the MaxiSYS Ultra S2 diagnostic tablet with Topology 3.0 ÔÇö delivers full-system scan capability (read/erase codes across all modules, live data, bi-directional tests) integrated into the same workflow
• Industry-leading vehicle coverage spanning U.S., Asian, and European makes and models
• OTA (over-the-air) software updates ensure continuous access to the latest OEM-sourced calibration and diagnostic coverage as new vehicles enter the market

Frame Design

• Robotic crossbar sets vertical calibration position automatically
• Automated unlevel floor compensation ÔÇö calibrations can be completed on surfaces that are not perfectly level without producing failed results
• Frame folded dimensions: 800 x 1000 x 1900 mm ÔÇö a manageable footprint for shop storage
• Power: 360W, 100ÔÇô264V input ÔÇö compatible with standard shop electrical

Digital Targets

The three digital monitors included with the IA1000DT automatically project the correct calibration pattern at each step of the ADAS calibration process. There is no manual pattern selection, no need to store and retrieve physical targets, and no physical target wear to manage over time. OTA updates continuously push new OEM-sourced target coverage as it becomes available.

Understanding the IA1000 Package Lineup

Every IA1000 package is built around the same AUTEL-CSC1000 calibration frame and the same core hardware. What distinguishes each package is what ships in the box and which calibration coverage is activated. The full lineup is as follows:

• IA1000 ÔÇö Frame only, no tablet, no calibration targets (alignment pre-check baseline)
• IA1000T ÔÇö Frame + Digital Targets (3 monitors), requires Ultra S2 tablet separately
• IA1000TDT ÔÇö Frame + Ultra S2 Tablet + Digital Targets (3 monitors)
• IA1000LDWT ÔÇö Frame + Ultra S2 Tablet + LDW Targets (lane departure warning cameras)
• IA1000LDWTDT ÔÇö Frame + Ultra S2 Tablet + LDW Targets + Digital Targets (3 monitors)
• IA1000AST ÔÇö Frame + Ultra S2 Tablet + LDW Targets + All Systems Calibration Equipment
• IA1000ASTDT ÔÇö Frame + Ultra S2 Tablet + LDW Targets + All Systems Equipment + Digital Targets (3 monitors)

Select the configuration based on which systems your shop needs to calibrate and whether a compatible MaxiSYS Ultra tablet is already in your inventory.

Technical Specifications

Spec	Value
Model	AUTEL-CSC1000
Rated Power	360 W
Power Supply	100ÔÇô264 V, 50/60 Hz
Calibration Frame Folded Dimensions	800 x 1000 x 1900 mm (31.50 x 39.37 x 74.80 in)
Crossbar Unfolded Length	2700 mm (106.30 in)
Crossbar Folded Length	400 mm (15.75 in)
Calibration Frame Height Range	1670ÔÇô2770 mm (65.75ÔÇô109.06 in)
Crossbar Height Range	300ÔÇô2500 mm (11.18ÔÇô98.43 in)
Camera Count	6
Camera Resolution	3072 x 2048 pixels per camera
Operating Temperature	-10 to 50┬░C (14 to 122┬░F)
Storage Temperature	-20 to 60┬░C (-4 to 140┬░F)
Compatible Tablet	MaxiSYS Ultra Tablet Series

Why Buy the MaxiSYS IA1000DT from ADAS Calibration Tools?

ADAS Calibration Tools has specialized in Autel ADAS calibration systems. We stock the complete IA1000 package lineup and are equipped to help you identify the configuration that aligns with your shop’s specific ADAS work mix ÔÇö whether that means LDW-only coverage, all-systems capability, or the digital target upgrade. Every order includes free shipping, free pre-sale and post-sale technical support at 800-123-4567, the full manufacturer warranty, and straightforward guidance on which package matches your volume and available space. These are significant capital purchases, and our goal is to make sure you invest in the right one the first time.

Call 800-123-4567 for quick answers and expert help!