Autel MaxiSYS IA1000ASTDT All-Systems ADAS Calibration with Digital Targets

Description

Autel MaxiSYS IA1000ASTDT ÔÇö All-Systems ADAS Calibration with Digital Targets

If you’re building out a shop for maximum ADAS calibration coverage and want the speed advantage of digital targets, the IA1000ASTDT is the configuration to consider. This package bundles the IA1000 calibration frame, the MaxiSYS Ultra S2 tablet, all-systems ADAS calibration targets and equipment, LDW targets, and three digital target monitors into a single, complete solution ÔÇö no gaps in system coverage, no compromises on workflow efficiency.

What’s Included

• IA1000 Calibration Frame (model AUTEL-CSC1000) with robotic crossbar and 6 HD cameras
• MaxiSYS Ultra S2 Tablet ÔÇö Autel’s flagship diagnostic tablet
• IA1000 Activation Card
• LDW (Lane Departure Warning) Targets ÔÇö physical targets for LDW-specific calibrations
• All Systems Calibration Equipment ÔÇö covers camera, radar, lidar, and night vision ADAS systems
• Digital Targets ÔÇö 3 Monitors ÔÇö auto-projects correct calibration pattern, eliminates manual target selection
• Digital Target Activation Card

IA1000 Platform ÔÇö Key Capabilities

Automated ADAS Targeting and Advanced Wheel Alignment

• Precision-engineered wheel clamp targets paired with 6 high-definition cameras (3072 x 2048 pixels each) deliver 0.02┬░ accuracy ÔÇö the tightest tolerance available in this class of equipment
• 5-way robotic, automated forward-facing target placement ÔÇö the crossbar relocates itself to the correct calibration position, cutting setup time significantly compared to manually adjusting a static frame
• Laser-guided positioning for Blind Spot, ACC, and AVM patterns ensures accurate placement for radar and camera calibration steps
• Full OEM-spec alignment measurement ÔÇö including camber, caster, toe, and beyond ÔÇö is completed before advancing to ADAS calibration

Target Validation and OEM-Compliant Reporting

• Digital Go-No-Go confirmation ÔÇö if target placement falls outside of spec, the system stops. This is a hard stop, not an advisory warning ÔÇö it prevents calibrations from proceeding on incorrectly positioned setups
• Validated target position data is captured in Pre/Post Scan reports, giving you insurance-ready documentation that calibration was performed according to OEM specifications
• All calibration procedures are OEM-sourced ÔÇö not generic aftermarket approximations

Diagnostics Integration

• The included MaxiSYS Ultra S2 tablet with Topology 3.0 brings full system scan capability into the same workflow ÔÇö read and erase codes across all modules, access live data, and run bi-directional tests without switching tools
• Industry-leading vehicle coverage across U.S., Asian, and European makes and models
• OTA (over-the-air) software updates deliver continuous access to the latest OEM-sourced calibration and diagnostic coverage as new vehicles come to market

Frame Design

• Robotic crossbar automatically positions itself to the correct vertical calibration height
• Automated unlevel floor compensation ÔÇö calibrations can be completed on surfaces that aren’t perfectly level without producing failed results
• Frame folded dimensions: 800 x 1000 x 1900 mm ÔÇö practical for shop storage between jobs
• Power: 360W, 100ÔÇô264V input ÔÇö compatible with standard shop electrical

Digital Targets ÔÇö Why They Matter at This Level

The “DT” in this model designation indicates the package includes three digital display monitors that project calibration patterns on demand, rather than requiring physical foam board targets to be located, handled, and manually positioned for each procedure. At the all-systems level ÔÇö where calibration work spans cameras, radar, lidar, and AVM systems ÔÇö having the correct pattern automatically projected for each specific step is a genuine time advantage over physical targets. Physical targets degrade with use and are vulnerable to damage; digital patterns remain accurate indefinitely. The monitors also self-adjust brightness to compensate for variable shop lighting conditions.

Understanding the IA1000 Package Lineup

Every IA1000 configuration is built on the same AUTEL-CSC1000 calibration frame and shares the same core hardware platform. What separates the packages is what comes in the box and what calibration coverage has been activated. The full lineup is listed below for comparison:

• IA1000 ÔÇö Frame only, no tablet, no calibration targets (alignment pre-check baseline)
• IA1000T ÔÇö Frame + Digital Targets (3 monitors), requires Ultra S2 tablet separately
• IA1000TDT ÔÇö Frame + Ultra S2 Tablet + Digital Targets (3 monitors)
• IA1000LDWT ÔÇö Frame + Ultra S2 Tablet + LDW Targets (lane departure warning cameras)
• IA1000LDWTDT ÔÇö Frame + Ultra S2 Tablet + LDW Targets + Digital Targets (3 monitors)
• IA1000AST ÔÇö Frame + Ultra S2 Tablet + LDW Targets + All Systems Calibration Equipment
• IA1000ASTDT ÔÇö Frame + Ultra S2 Tablet + LDW Targets + All Systems Equipment + Digital Targets (3 monitors)

Select the configuration based on which ADAS systems you need to cover and whether you already own a compatible MaxiSYS Ultra tablet.

Technical Specifications

Spec	Value
Model	AUTEL-CSC1000
Rated Power	360 W
Power Supply	100ÔÇô264 V, 50/60 Hz
Calibration Frame Folded Dimensions	800 x 1000 x 1900 mm (31.50 x 39.37 x 74.80 in)
Crossbar Unfolded Length	2700 mm (106.30 in)
Crossbar Folded Length	400 mm (15.75 in)
Calibration Frame Height Range	1670ÔÇô2770 mm (65.75ÔÇô109.06 in)
Crossbar Height Range	300ÔÇô2500 mm (11.18ÔÇô98.43 in)
Camera Count	6
Camera Resolution	3072 x 2048 pixels per camera
Operating Temperature	-10 to 50┬░C (14 to 122┬░F)
Storage Temperature	-20 to 60┬░C (-4 to 140┬░F)
Compatible Tablet	MaxiSYS Ultra Tablet Series

Why Buy the MaxiSYS IA1000ASTDT from ADAS Calibration Tools?

ADAS Calibration Tools has specialized in Autel ADAS calibration systems. We stock the complete IA1000 lineup and work with shops to identify the configuration that fits their specific ADAS work mix ÔÇö whether that’s LDW-only coverage, full all-systems capability, or the digital target upgrade for higher-volume operations. Every order ships free and comes with free pre-sale and post-sale technical support at 800-123-4567, the full manufacturer warranty, and straightforward guidance on which package makes sense for your bay layout and vehicle volume. These are significant capital investments, and we’d rather help you choose correctly the first time than oversell a configuration that doesn’t fit your workflow.

Call 800-123-4567 for quick answers and help!