TOPDON Phoenix Mobile ADAS

Description

Topdon Phoenix Mobile ADAS Calibration System

Built for shops that can’t afford to tie ADAS work to a single fixed bay, the Topdon Phoenix Mobile ADAS is a fully portable calibration frame system that travels with your technicians and handles the growing volume of recalibration jobs that follow windshield replacements, front-end repairs, and sensor swaps. Priced at $9,999 with the complete target library bundled in ÔÇö camera targets, radar reflectors, and laser positioning tools covering a wide span of domestic and import makes ÔÇö this is a purpose-built solution for modern ADAS workflow demands.

Who This Is For

The Phoenix Mobile suits a specific kind of shop. Consider it if you fall into one of these categories:

• Independent repair shops and collision centers managing ADAS calibrations across a mixed vehicle lineup without a permanent alignment bay dedicated to the work
• Mobile calibration operators providing on-site service at dealerships, body shops, or fleet maintenance yards
• Shops already equipped with a Topdon Phoenix diagnostic tablet that need the physical frame and target hardware to perform static calibrations

High-volume single-make operations ÔÇö dealer service departments, fleet accounts ÔÇö may find a fixed-bay system a better match. For mixed-fleet shops and technicians working across multiple locations, the foldable frame architecture delivers a real operational edge.

Portability and Setup

• Foldable frame design: The collapsible arms and folding base legs allow the entire system to break down compact enough to load into most vehicle trunks ÔÇö critical for mobile operators doing on-site work at dealerships or collision facilities
• Setup time: A technician familiar with the system can have the frame positioned and ready for calibration in approximately 30 minutes
• Multifunctional base: 360-degree swivel wheels enable repositioning without lifting ÔÇö a practical feature when working on uneven shop floors, driveways, or outdoor service areas
• Height adjustment: Frame height is adjustable to accommodate varying vehicle profiles and sensor mounting positions

Precision Positioning

• Five-line laser device (LAM09-01): Establishes accurate frame placement relative to the vehicle centerline for consistent positioning across procedures
• Cross laser (LAM09-02): Provides supplementary lateral and horizontal alignment reference
• Laser reflector (LAM09-03) and auxiliary mirror (LAM09-04): Support positioning workflows for specific makes and calibration routines that require additional reference points
• Center-positioning system: Enables fine micro-adjustments for exact target placement ÔÇö small offsets in positioning can directly affect calibration outcomes, making this level of precision essential
• L-Type positioning bracket (LAM09-05) and plumb bob (LAM09-06): Provide manual reference alignment capability where procedures call for it

Target Library ÔÇö What’s Included

The package ships with targets covering a broad range of LDW (Lane Departure Warning) camera calibration procedures across major makes and model lines. All part numbers below are confirmed from the manufacturer’s package list:

Accessories and Positioning Tools:

• Five Line Laser ÔÇö LAM09-01
• Cross Laser ÔÇö LAM09-02
• Laser Reflector ÔÇö LAM09-03
• Auxiliary Mirror ÔÇö LAM09-04
• L-Type Positioning Bracket ÔÇö LAM09-05
• Plumb Bob ÔÇö LAM09-06
• Targets Storage Case ÔÇö LAM09-07
• Targets Extension Rod ÔÇö LAM09-08
• Targets Extension Rod II ÔÇö LAM09-09

LDW Large Targets:

• VW/Audi ÔÇö LAM01-02
• Hyundai/Kia ÔÇö LAM01-09
• Subaru ÔÇö LAM01-15
• Subaru LDW ÔÇö LAM01-21

LDW Small Targets:

• Mercedes-Benz ÔÇö LAM01-01
• Mazda ÔÇö LAM01-10
• Hyundai/Kia ÔÇö LAC01-13
• Honda ÔÇö LAM01-20
• Honda Left ÔÇö LAM01-04-L
• Honda Right ÔÇö LAM01-04-R
• Nissan Left ÔÇö LAM01-07-L
• Nissan Right ÔÇö LAM01-07-R
• Mazda Left ÔÇö LAM01-16-L
• Mazda Right ÔÇö LAM01-16-R
• Mitsubishi Right ÔÇö LAM01-19-R
• Mitsubishi Left ÔÇö LAM01-19-L
• Renault/Nissan Left ÔÇö LAM01-12-L
• Toyota ÔÇö LAM01-06-1
• Toyota ÔÇö LAM01-06-2
• Toyota ÔÇö LAM01-06-3
• Honda ÔÇö LAM01-17
• Suzuki Left ÔÇö LAM01-18-L
• Suzuki Right ÔÇö LAM01-18-R

Topdon Phoenix Compatibility

The Phoenix Mobile frame is designed to work with Topdon’s Phoenix Series diagnostic scanners ÔÇö the Phoenix Mobile tablet, Phoenix Elite, and related configurations. The calibration procedure itself is driven through the ADAS software on those tablets; the frame and target set are the physical hardware that completes the system. If you’re running a Phoenix tablet and need the frame to start performing static calibrations, this is the kit. If you don’t yet have a Phoenix tablet, contact us to go over combined tablet-plus-frame bundle configurations.

Calibration Capability

The system supports static calibration procedures across a range of ADAS sensor types, including:

• Forward-facing cameras ÔÇö lane departure warning, forward collision warning, and traffic sign recognition systems
• Radar and millimeter-wave sensor systems where manufacturer-supported targets are included
• AVM (around-view monitoring) and night-vision calibrations where applicable by make and current software version

Dynamic calibration ÔÇö road-speed recalibration performed after the static procedure ÔÇö is handled through the Phoenix diagnostic software during a drive cycle. Vehicle coverage and the availability of specific calibration procedures are tied to your Phoenix software subscription level. Confirm that your subscription covers the makes you service most before purchasing.

Practical Considerations Before You Buy

• Floor space requirements: Even a portable frame demands a flat, level work surface with adequate clearance in front of the vehicle. Assess your work area before committing to setup.
• Software subscription: All ADAS calibration procedures execute through the Phoenix tablet software. Verify your current subscription level covers the makes in your service mix.
• Target coverage: The included targets address the makes listed in this package. If your vehicle mix extends to makes not covered here, additional make-specific targets may be available separately ÔÇö contact us to confirm before purchase.
• All-in value: At $9,999 with the full target set included, this represents a competitive entry point for a complete mobile ADAS calibration system. Many comparable offerings from competing brands price the target library separately, making the total cost of entry significantly higher.

Why Buy From ADAS Calibration Tools?

• Specialist: We sell diagnostic and calibration equipment exclusively ÔÇö not a general-purpose retailer that happens to stock scan tools alongside unrelated merchandise
• Free shipping: No freight charges or hidden shipping fees on this or any order
• Free tech support: Call 800-123-4567 and reach someone with hands-on knowledge of this equipment
• Full manufacturer warranty: Covered under Topdon’s standard warranty terms
• Straight answers: If the Phoenix Mobile isn’t the right match for your shop’s specific vehicle mix and workflow, we’ll tell you that directly and help you find what is

Call 800-123-4567 for quick answers and expert guidance.