Radar 3 in 1 Calibration Set with Carrying Case

Description

Launch Tech Radar 3 in 1 Calibration Set with Carrying Case (LAU701070015)

Shops handling windshield replacements, collision repairs, or radar sensor R&R know the problem well: ACC radar calibration, blind spot monitoring calibration, and corner reflector calibration traditionally demanded separate targets and adapters for each procedure. The Launch Tech Radar 3 in 1 Calibration Set solves that by combining all three into a single stand ÔÇö one kit, one setup, three calibration types covered.

This is not a full ADAS frame system. It is a purpose-built radar calibration accessory engineered to work alongside Launch’s X-431 ADAS platform. Shops that already own the ADAS frame and software invest in this kit to extend their radar calibration capability ÔÇö no redundant stands, no hunting down individual targets.

Three Radar Calibration Types on One Stand

The 3-in-1 unit addresses:

• ACC (Adaptive Cruise Control) Radar Calibration: Forward-facing radar targets for front radar sensor alignment ÔÇö required after windshield pulls, front-end collision repairs, or any procedure that disturbs the front radar module.
• Doppler Simulator Calibration: Covers blind spot monitoring and rear collision warning systems. The Doppler Simulator (LAC05-04) simulates a moving target to confirm the sensor reads correctly after replacement or realignment.
• Corner Reflector Calibration: Addresses corner and rear radar systems ÔÇö the sensors driving blind spot, lane change assist, and rear cross-traffic alert. Required whenever a rear quarter panel or bumper cover is replaced or repainted.

A single-button height adjustment lets you position the stand quickly. There is no wrestling with manual height locks in the middle of a calibration procedure.

Who This Kit Is Built For

• Windshield replacement shops: ACC radar recalibration is mandatory on nearly every modern vehicle following a windshield pull. This kit provides the correct target hardware for Launch’s guided procedure.
• Collision centers: Front-end and rear-end repairs routinely disturb radar sensors. Consolidating all three calibration target types onto one stand reduces the time spent swapping equipment between bays.
• General repair shops expanding into ADAS: If you are already running an X-431 ADAS Pro Plus, ADAS Mobile Plus, or ADAS HD, this kit is the most efficient path to adding radar calibration to your service menu without purchasing three separate stands.

Complete Box Contents

• 3-IN-1 Main Unit ÔÇö the adjustable stand
• ACC Radar Target (LAM05-02)
• Doppler Simulator (LAC05-04)
• Corner Reflector
• Mounting Adapter for ACC Radar Target
• 3.5mm Single Hex (6PT) Socket Tool
• Five-line Laser Device (LAM09-01)
• Power Adapter
• Plumb Line (LAM09-06)
• Laser Reflector (LAM09-03)
• Auxiliary Mirror (LAM09-04)
• Tape Measure
• Positioning Bracket (LAM09-05)
• Cross Stickers (10)
• Travel/Storage Case
• User Manual
• Activation PIN Card

Everything you need to execute guided radar calibrations through a compatible Launch scan tool is included in the kit. The travel/storage case keeps equipment protected between jobs and makes the kit practical for mobile ADAS operations.

Compatible Launch Scan Tools

This kit is engineered for use with the following Launch platforms:

• X-431 ADAS Pro Plus
• X-431 ADAS Mobile Plus
• X-431 ADAS HD
• Throttle V
• Torque Link
• Turbo III

If you are running a different scan tool platform or are unsure whether your current equipment supports this calibration set, contact us before ordering. We will confirm compatibility for your specific configuration.

Where This Fits in the Launch ADAS Lineup

The Radar 3 in 1 Calibration Set (LAU701070015, Part No. 701070015) is a standalone radar accessory ÔÇö it does not replace the full ADAS frame system. Here is how it positions within the Launch ecosystem:

• Need radar calibration only: This kit, paired with a compatible Launch scan tool you already own, covers ACC, blind spot/rear collision Doppler, and corner reflector calibration.
• Need full ADAS capability (cameras + radar): You will need the complete Launch X-431 ADAS system with the main frame, then add this radar set for full coverage. Contact us to spec out the complete configuration.
• Already have the full ADAS frame: This kit is the direct add-on to expand your radar calibration target library without any duplication.

At $3,360.00 (MSRP $4,495.95), this kit comes in substantially below the cost of purchasing the three target types individually. The included carrying case adds genuine value for shops that rotate equipment between bays or operate mobile ADAS services.

Why Buy From ADAS Calibration Tools?

• Specialist ÔÇö We focus exclusively on professional diagnostic and ADAS equipment. We know this product line thoroughly and can answer technical questions before and after the sale.
• Free shipping on this order.
• Free tech support at 800-123-4567 ÔÇö Reach us when you are setting up for the first time or when a calibration procedure raises a question mid-job.
• Full manufacturer warranty ÔÇö Covered under Launch Tech USA’s warranty terms. We handle warranty issues directly on your behalf.
• Straightforward upgrade guidance ÔÇö If this kit is not the right fit for your shop’s workflow, we will tell you what is. Putting the wrong equipment in your bay is not something we are willing to do just to close a sale.

Call 800-123-4567 for fast answers and expert assistance!