Bosch Subaru Target Boards

Description

Bosch CTA214KIT Subaru Target Boards ÔÇö DAS 3000 ADAS Calibration

Shops that regularly service Subaru vehicles ÔÇö Outback, Forester, Legacy, Impreza, Crosstrek, or Ascent ÔÇö and perform windshield replacements, camera R&R, or front-end collision repairs require brand-specific target boards to execute static ADAS calibration properly. The Bosch CTA214KIT is that solution: a Subaru-dedicated target board kit engineered for use with the Bosch DAS 3000 ADAS recalibration system. Without the correct OEM-pattern targets installed on the DAS 3000 frame, valid static calibration of Subaru’s EyeSight driver assistance cameras simply cannot be completed.

Mounted to the DAS 3000 fixture, this kit presents the precise visual reference patterns that Subaru’s EyeSight stereo camera system requires during its calibration routine. When paired with an ADS 525X or ADS 625X scan tool, the complete system guides your technician step by step through positioning, frame alignment, and the full calibration sequence.

What the CTA214KIT Does

• Subaru EyeSight Compatibility: Built specifically for calibrating Subaru EyeSight stereo cameras ÔÇö the dual-camera forward collision and lane-keeping system equipped on most late-model Subaru models.
• Static Calibration Target: Delivers the correct visual reference pattern the EyeSight cameras must detect to complete a successful static recalibration following windshield removal, camera removal, or front-end structural repairs.
• DAS 3000 Integration: Attaches directly to the Bosch DAS 3000 recalibration frame and operates within its full guided workflow ÔÇö the DAS 3000 uses distance markers and wheel-hub thrust-angle references to position the frame, after which the scan tool drives the calibration routine with these boards in position.
• Scan Tool Pairing: Compatible with Bosch ADS 525X and ADS 625X diagnostic platforms. The scan tool software steps the technician through every stage of the process and verifies successful calibration completion.
• Collision and Glass Shop Essential: Any shop returning a Subaru EyeSight vehicle to road-ready status after windshield replacement or front-end work must have these boards to satisfy OEM calibration requirements.

Who Needs This Kit

• Glass shops performing Subaru windshield replacements ÔÇö EyeSight cameras are mounted to the windshield bracket and must be recalibrated after every removal and reinstall.
• Collision repair shops handling Subaru front-end structural or suspension repairs that disturb camera positioning or alignment.
• Independent shops servicing Subaru at volume who are already operating within the DAS 3000 ecosystem for other OEM-specific targets.

If Subaru traffic through your shop is infrequent, carefully weigh your volume against the $1,649.99 investment. For shops where Subaru is a consistent part of the ticket mix, this kit recovers its cost quickly ÔÇö particularly when measured against ongoing sublet calibration fees or the risk of a customer comeback on a failed calibration.

What’s in the Box

• Subaru EyeSight static calibration target board set (CTA214KIT)
• Hardware and mounting components for DAS 3000 frame attachment

Complete board count and full hardware details are available on request ÔÇö reach us at 800-123-4567 for the full kit contents prior to ordering.

What You Need to Run This Kit

• Bosch DAS 3000 ADAS recalibration frame (sold separately)
• Bosch ADS 525X or ADS 625X scan tool with current ADAS software (sold separately)
• Bosch BAP (ADAS Positioning) System if mandated by the specific vehicle calibration procedure
• Level calibration floor space meeting DAS 3000 minimum area requirements

This kit is not a standalone tool. It functions as a vehicle-specific target accessory within the DAS 3000 system. If you’re building out ADAS calibration capability from the ground up, contact us ÔÇö we’ll help you define the complete system configuration before you commit to any hardware purchase.

Why Buy From ADAS Calibration Tools?

• Specialist ÔÇö Our focus is exclusively on professional diagnostic and ADAS calibration equipment. We know this ecosystem thoroughly.
• Free shipping on qualifying orders to the contiguous US.
• Free tech support at 800-123-4567 ÔÇö Our technicians can confirm compatibility, assist with initial setup, and help troubleshoot calibration issues.
• Full manufacturer warranty ÔÇö Every Bosch product ships with complete factory warranty coverage.
• Honest guidance before you buy ÔÇö If this kit isn’t the right match for your shop’s vehicle mix or calibration volume, we’ll say so upfront.

Call 800-123-4567 for fast answers and expert help!