Autel MaxiSYS MS909EV

Description

Autel MaxiSYS MS909EV ÔÇö Specialized EV and Hybrid Diagnostic Tablet

Built specifically for shops that service electric, plug-in hybrid, and hybrid vehicles alongside conventional gas and diesel equipment, the Autel MaxiSYS MS909EV delivers a level of EV-focused capability that generic OBD scanners simply cannot match. Central to this is the included EVDiag Box ÔÇö a dedicated hardware module with specialty cables that enables direct battery pack testing at the HV system level. At the same time, it handles full-system diagnostics across every other vehicle type you run through your bays, making it a practical single-tool solution for mixed-fleet shops.

EV and hybrid vehicles are no longer an edge case. With electrified vehicles claiming a steadily larger portion of the vehicles on the road, shops that lack the ability to properly evaluate battery health, trace high-voltage faults, or work through EV-specific systems are leaving real service revenue on the table. The MS909EV is engineered for shops ready to take ownership of that work.

EV and Hybrid Diagnostic Capabilities

This is the area where the MS909EV pulls clearly ahead of a conventional diagnostic tablet:

• High-voltage system rapid analysis ÔÇö reads and clears HV fault codes, with live data visibility into battery management systems, motor controllers, and charging systems
• Battery pack diagnostics ÔÇö accessible via the OBD port or directly through the included EVDiag Box and specialty jumper cables connected to the HV system
• State of Charge (SOC) analysis ÔÇö displays actual current charge level against rated pack capacity
• State of Health (SOH) analysis ÔÇö a true condition assessment of the battery, not simply a fault code retrieval
• High-voltage system block diagrams ÔÇö full diagrams of HV architecture, component placement, and socket layouts rendered directly on the tablet screen
• Step-by-step disassembly guidance ÔÇö system-specific instructions for safely accessing high-voltage components
• Safe testing guidance ÔÇö detailed on-screen connection instructions when specialty cables are used for direct battery testing

EV and hybrid diagnostic vehicle coverage spans U.S., European, and Asian electric and hybrid models.

Standard Diagnostic Capabilities (All Vehicles)

• Full system access ÔÇö complete module coverage across engine, transmission, ABS, SRS, body, chassis, TPMS, and beyond
• Bi-directional control ÔÇö component activation and actuator testing
• Coding and adaptations ÔÇö OE-level module programming and adaptation resets
• 36 service reset functions ÔÇö oil, EPB, SAS, BMS, DPF, IMMO, TPMS, and more
• All 10 OBDII test modes ÔÇö including live data, freeze frame, and Mode 6
• Diesel DPF resets ÔÇö emission resets for light and medium-duty diesel vehicles
• Topology module mapping ÔÇö color-coded all-system status overview on supported vehicles
• AutoVIN / Auto-Scan ÔÇö single-tap vehicle identification and complete system scan
• Cloud-based Data Manager ÔÇö stores customer records, vehicle service history, and technician notes
• Interactive Data Logging ÔÇö allows direct contact with Autel support for real-time troubleshooting assistance
• Security gateway access ÔÇö FCA/Stellantis secure gateway support via AutoAuth account
• ADAS calibration ÔÇö available with ADAS software upgrade and corresponding frame kit purchase

MS909EV vs. MSUltra EV Comparison

If your shop’s primary requirement is comprehensive EV battery diagnostics combined with full-system coverage ÔÇö without the need for a built-in oscilloscope ÔÇö the MS909EV is the right fit. If your workflow also demands advanced electrical diagnostic capability, the MSUltra EV adds the 5-in-1 VCMI with scope, multimeter, CAN tester, and waveform generator.

Hardware Specifications

• Operating System: Android 7.0
• Processor: Qualcomm 660 Octa-core (2.2GHz A73 + 1.8GHz A53)
• Memory: 4GB RAM / 128GB storage
• Display: 9.7″ TFT-LCD, 1536 x 2048, Asahi Glass
• Battery: 15,000mAh 3.8V lithium-polymer
• Weight: 1.66 kg (3.66 lbs)
• Dimensions: 304.4 x 227.8 x 42.5 mm (11.98″ x 8.97″ x 1.67″)
• Connectivity: Dual Wi-Fi 802.11 a/b/g/n/ac 2×2 MIMO, Bluetooth 5.0, GPS, 2x USB-A, Mini USB, HDMI 2.0, SD card up to 256GB
• Camera: 16MP rear autofocus/flash, 16MP front
• VCI: MaxiFlash VCI (Bluetooth), J2534 pass-through
• Operating Temperature: 0 to 50┬░C (32 to 122┬░F)
• Storage Temperature: -20 to 60┬░C (-4 to 140┬░F)

Protocol Support

DoIP, PLC J2497, ISO-15765, SAE-J1939, ISO-14229 UDS, SAE-J2411 (GMLAN), ISO-11898-2, ISO-11898-3, SAE-J2819 (TP20), TP16, ISO-9141, ISO-14230, SAE-J2610 (Chrysler SCI), SAE-J2809 (Honda Diag-H), SAE-J2740 (GM ALDL), SAE-J1567 (CCD BUS), Ford UBP, Nissan DDL UART, BMW DS2, BMW DS1, SAE J2819 (VAG KW81/KW82), SAE J1708, SAE-J1850 PWM (Ford SCP), SAE-J1850 VPW (GM Class2)

What Is Included

• Autel MaxiSYS MS909EV tablet
• EVDiag Box with specialty HV cables and jumpers
• MaxiFlash VCI (Bluetooth/USB)
• OBD2 cable, AC/DC power adapter, carrying case
• One-year limited warranty
• One year of free software updates via Wi-Fi

Why Buy the Autel MaxiSYS MS909EV From ADAS Calibration Tools?

ADAS Calibration Tools has focused exclusively on professional automotive diagnostic and calibration equipment. We can walk you through whether the MS909EV is the right match for your current EV vehicle mix ÔÇö or whether stepping up to the MSUltra EV makes more sense for where your shop is headed. Call our free tech support line at 800-123-4567 and you will get a direct, honest answer. Free shipping, full manufacturer warranty, and straightforward guidance ÔÇö no sales pressure.

Call 800-123-4567 for quick answers and help!