Autel MS919 + ADAS

Description

Autel MaxiSYS MS919 + ADAS ÔÇö Complete Diagnostic and ADAS Calibration Bundle

The MS919 + ADAS package combines Autel’s most capable mid-range scan tablet with an ADAS software license that unlocks full calibration coverage across more than 100 vehicle brands. Whether your shop works on compact cars, light trucks, or Class 6 medium-duty vehicles ÔÇö and you’re handling windshield replacements, front-end repairs, or suspension work that disturbs cameras and radar sensors ÔÇö this configuration takes you from initial scan all the way through final calibration verification without sending work elsewhere.

Who This Is For

This bundle is built for shops that currently perform ADAS recalibrations in-house or are ready to start. On its own, the MS919 is a serious diagnostic platform; the added ADAS license means calibration revenue stays in your bay instead of going out the door. It’s an especially strong fit for operations running a mixed vehicle roster ÔÇö domestic, import, European, and medium-duty commercial. The MS919’s coverage spans everything from Alfa Romeo and Tesla to RAM trucks, Ford, and Mercedes-Benz Sprinters.

MaxiSYS MS919 Diagnostic Platform

• Vehicle Coverage: More than 80 vehicle brands, spanning passenger cars and light trucks through Class 6 medium-duty. Domestic, Asian, and European makes are all included.
• MaxiFlash VCMI (5-in-1): The Vehicle Communication and Measurement Interface consolidates multiple tools into one unit ÔÇö handling wireless vehicle communications while also operating as a 4-channel oscilloscope, waveform generator, multimeter, and CAN bus tester.
• Communication Protocols: Full support for DoIP, D-PDU, and Mega CAN ÔÇö the protocols required by late-model vehicles with high-speed networks and over-the-air-capable architectures.
• Intelligent Diagnostics: Walks technicians from fault code to repair procedure to post-repair verification with detailed repair data, component illustrations, and waveform library references. Cuts diagnostic guesswork on unfamiliar systems.
• Dynamic Topology Module Mapping: On supported vehicles, displays the live network topology in real time ÔÇö which modules are active, which are faulted ÔÇö eliminating the need to navigate system by system manually.
• Pre-Scan and Post-Scan Reports: Full vehicle health snapshots captured before and after repair. Documents all DTCs, module status, and ADAS calibration outcomes, giving your shop a defensible record if calibration results are ever questioned.
• Oscilloscope Preset Guides: Built-in waveform guides for common diagnostic tests so technicians spend less time configuring captures and more time reading results.

ADAS Calibration Software

• Coverage: More than 100 vehicle brands enabled for ADAS calibration through the software license included with this bundle.
• Systems Supported: Front camera (lane departure, forward collision), radar/ACC, blind-spot monitoring, night vision, around-view monitoring (AVM), and additional static and dynamic calibration targets depending on the specific vehicle.
• When It’s Required: Any windshield replacement, front-end collision repair, suspension alignment, or sensor removal that relocates a calibrated camera or radar unit triggers a recalibration requirement. Most OEMs and insurers now mandate documented recalibration before vehicle release.
• Calibration Types: Static calibration (target panels positioned in front of the vehicle) and dynamic calibration (drive-based procedures) ÔÇö the correct method depends on the make and system involved.
• Documentation: Calibration results are captured in the post-scan report, producing a timestamped record tied directly to the VIN.

What’s in the Box

• MaxiSYS MS919 tablet
• MaxiFlash VCMI (5-in-1 communication and measurement interface)
• ADAS software license (activated on the MS919)
• Standard OBD-II connector and vehicle cable set
• Carrying case
• AC power adapter and charging cable
• Note: ADAS calibration targets and frame hardware (CSC frame, MA600 mobile frame, etc.) are sold separately. Contact us to configure the complete calibration setup for your bay.

What This Bundle Does Not Include

The ADAS software license activates calibration procedures on the MS919 tablet. Physical calibration ÔÇö positioning target panels in front of the vehicle ÔÇö requires a compatible target frame and panels. Autel’s CSC frame, IA800, IA900WA, and MA600 mobile frame are the standard options. If your shop doesn’t already have a frame, reach out and we’ll help you spec the right one based on your bay layout and vehicle mix.

MS919 + ADAS vs. Other Configurations

• MS909 + ADAS vs. MS919 + ADAS: The MS919 adds the VCMI’s oscilloscope and measurement capabilities. If your technicians use a scope regularly, the step-up cost is well justified. If your shop’s workflow is primarily code-and-function-based, the MS909 bundle covers the same ADAS software at a lower price point.
• MS919 alone (no ADAS): Full diagnostic coverage with no calibration capability. The right choice if you’re routing ADAS work to a dealer or specialty shop and have no plans to bring it in-house.
• MaxiSYS Ultra + ADAS: Autel’s flagship tablet with expanded features and broader scope capability. A higher investment, but appropriate for high-volume operations or shops needing the deepest OE-level access available.

Why Buy From ADAS Calibration Tools?

• Specialist ÔÇö our focus is exclusively professional diagnostic equipment, not general tool retail.
• Free standard shipping on this unit.
• Free tech support at 800-123-4567 ÔÇö speak directly with someone who knows Autel’s product line and can help you get calibrations running correctly from day one.
• Full manufacturer warranty honored on all Autel products we carry.
• Straightforward guidance ÔÇö if the MS919 + ADAS isn’t the right fit for your shop, we’ll tell you and point you toward the configuration that is.

Call 800-123-4567 for fast answers and expert help!