TEXA Pair of 360┬░ camera calibration mats for TOYOTA/LEXUS/SCION/SUZUKI

Description

TEXA 360┬░ Camera Calibration Mats for Toyota / Lexus / Scion / Suzuki (SKU: 3911405)

If your shop calibrates around-view monitor (AVM) or 360┬░ surround-view systems on Toyota, Lexus, Scion, or Suzuki vehicles, these OEM-specific floor mats are an essential component of your TEXA RCCS workflow. Sold as part number 3911405, this matched pair is engineered to the precise pattern, geometry, and color specifications that the TEXA IDC5 software and Navigator interface require when performing surround-view camera calibrations across all four of these brands.

Surround-view systems rely on four wide-angle cameras ÔÇö positioned at the front, rear, left mirror, and right mirror ÔÇö to composite a synthetic bird’s-eye perspective image. Whenever any camera in that array is removed, repositioned, or replaced ÔÇö whether due to mirror work, body panel repairs, rear camera R&R, or a firmware update that trips a recalibration flag ÔÇö the entire surround-view system must be recalibrated as a unit. These mats lay down the reference geometry on the floor around the vehicle, enabling the software to verify each camera’s angle, overlap zone, and stitching alignment against OEM specification.

What’s Included

• Two calibration mats ÔÇö a matched pair carrying the OEM-specified pattern for Toyota/Lexus/Scion/Suzuki AVM systems
• Compatible with the TEXA RCCS 2, RCCS 3, or RCCS 3 EVO calibration structure and TEXA IDC5 ADAS software
• Patterns validated against Toyota/Lexus OEM calibration requirements

Which Vehicles This Covers

These mats support the 360┬░/around-view camera systems found throughout the Toyota, Lexus, Scion, and Suzuki model ranges. Specific model-year applicability depends on which vehicles in those lineups are factory-equipped with OEM surround-view ÔÇö your IDC5 software will verify coverage at the VIN level prior to initiating the procedure. If you need to confirm applicability on a specific model before ordering, contact ADAS Calibration Tools directly.

When Does a Shop Need These?

• Mirror replacement or repainting ÔÇö side cameras are integrated into mirror housings; any R&R requires recalibration
• Rear camera replacement ÔÇö frequently encountered on higher-trim Lexus and Toyota models following backup camera failure or collision damage
• Front camera R&R ÔÇö the front AVM camera is commonly part of a front grille or bumper assembly
• Post-collision repair ÔÇö any structural or body panel work in the vicinity of a camera mount demands system verification
• OEM software updates ÔÇö certain Toyota/Lexus updates reset camera calibration flags, mandating a fresh calibration procedure

How the Calibration Works

With the vehicle centered on an alignment rack or a flat, level floor surface, the mats are placed flat at the designated positions around the vehicle ÔÇö front, rear, and both sides. The TEXA RCCS laser alignment system squares the mats to the vehicle centerline. IDC5 then guides you through a camera-by-camera image capture sequence, referencing the mat patterns as targets to calculate each camera’s positional offset and correct the stitching overlay. The entire procedure is guided on-screen ÔÇö no freehand measurement is involved at any step.

What You Already Need

These mats function as calibration target accessories within the TEXA ADAS ecosystem. Completing a calibration requires:

• TEXA RCCS 2, RCCS 3, or RCCS 3 EVO calibration structure
• TEXA Navigator TXT or NANO diagnostic interface
• Active TEXA IDC5 ADAS software subscription with 360┬░ camera calibration enabled

If you already have the RCCS structure and IDC5 but are missing brand-specific mat sets, this pair closes the gap for your Toyota/Lexus/Scion/Suzuki work. If you’re still assembling your ADAS capability, contact ADAS Calibration Tools ÔÇö we can spec the right bundle for your shop’s vehicle mix and volume.

Pricing and Configuration

The 3911405 mat pair is priced at $809. OEM-specific mat sets for additional manufacturers are sold separately. For shops servicing multiple brands, ADAS Calibration Tools can help determine which mat sets to prioritize based on your specific vehicle throughput.

Why Buy From ADAS Calibration Tools?

• ADAS specialist ÔÇö we stock and support the complete TEXA RCCS ecosystem, not just the hardware
• Free shipping on this order
• Free tech support at 800-123-4567 ÔÇö call before you order if you need to verify compatibility with your existing RCCS setup
• Full manufacturer warranty honored on all TEXA accessories
• Straightforward upgrade guidance ÔÇö if you need a different mat set or a complete RCCS bundle, we’ll give you an honest recommendation

Call 800-123-4567 for quick answers and expert help!