Description
TEXA Front Video Camera Calibration Panel for Subaru ÔÇö Part 3908414
Built specifically for Subaru applications, this calibration panel works with the TEXA RCCS (Radar & Camera Calibration System) to carry out front video camera calibration following windshield replacement, camera removal and reinstallation, or front-end suspension service. Subaru’s EyeSight driver assistance system is now standard across a wide range of late-model vehicles ÔÇö Impreza, Outback, Forester, Legacy, Crosstrek ÔÇö which means shops doing any of that work need the OEM-specified target panel to restore the system to manufacturer specification. Off-brand or generic targets aren’t an acceptable substitute. This panel is.
What This Panel Does
EyeSight relies on a stereo camera pair positioned at the top of the windshield. Once either camera has been removed or the windshield disturbed, both cameras require recalibration to OEM spec before any EyeSight function ÔÇö adaptive cruise control, pre-collision braking, lane keep assist ÔÇö will operate as intended. During that static calibration procedure, the TEXA RCCS system needs a manufacturer-specified visual target. That’s exactly what this panel provides.
- Subaru EyeSight compatibility: Engineered for Subaru’s stereo front camera system as deployed across the full EyeSight lineup. Exact model-year coverage is available upon request ÔÇö reach out to ADAS Calibration Tools before ordering if you need confirmation for a particular application.
- Camera mounting template included: Before calibration can begin, the camera must be physically reinstalled to OEM position. The included template makes that step precise and repeatable. Skipping or rushing this step is among the most frequent causes of calibration failure and repeat visits.
- Bubble level included: Panel leveling is a non-negotiable part of the setup. A target that isn’t level produces a calibration that isn’t level. The bubble level supplied with this kit lets the technician verify panel position before the TEXA calibration routine is initiated.
- Pairs with TEXA RCCS 2, RCCS 3, or RCCS 3 EVO: This panel mounts directly to the TEXA calibration frame and is not a standalone device. Running the calibration procedure requires the TEXA RCCS structure along with IDC5 software and an active ADAS module.
- Static calibration target: The procedure is performed with the vehicle stationary in a controlled bay. TEXA’s IDC5 software walks the technician through every step of the process in a guided workflow.
Who Needs This Panel
If your shop handles windshield replacements or front-end collision repairs on Subaru vehicles equipped with EyeSight, this panel belongs in your bay. Subaru has expanded its market presence considerably, and EyeSight ships as standard equipment across most trim levels ÔÇö meaning the volume of required calibrations is both real and increasing. Shops that already operate a TEXA RCCS system will find this panel a straightforward add-on that extends their Subaru coverage. For shops in the process of building out an ADAS calibration bay, this panel is a dedicated line item in any complete Subaru kit.
This is also the correct solution for shops that have encountered Subaru warranty concerns or liability issues after attempting calibration with generic targets or bypassing the procedure entirely. Correct panel. Correct procedure. Correct outcome.
What’s in the Box
- TEXA front video camera calibration panel for Subaru (part 3908414)
- Camera mounting template
- Bubble level
What You Need to Run This
- TEXA RCCS 2, RCCS 3, or RCCS 3 EVO calibration frame/structure
- TEXA Navigator diagnostic interface (NANO S or TXT)
- TEXA IDC5 software with ADAS calibration module active
- A level, properly prepared calibration bay meeting TEXA’s setup requirements
If your shop hasn’t yet invested in the full TEXA RCCS system and you’re weighing what a complete ADAS bay build-out involves, contact us. ADAS Calibration Tools can walk you through what a fully Subaru-capable setup looks like and what the investment looks like across different volume scenarios.
Why Buy From ADAS Calibration Tools?
- ADAS specialists ÔÇö we stock TEXA panels, frames, and interfaces and understand the full ecosystem.
- Free shipping on this order.
- Free tech support at 800-123-4567 ÔÇö questions about panel setup, bay requirements, or RCCS compatibility are exactly the kind of thing to call about before you buy.
- Full manufacturer warranty ÔÇö TEXA-backed coverage on all panels and hardware.
- Honest upgrade guidance ÔÇö if this panel isn’t the right fit for your specific application, we’ll say so and direct you to what is.
Call 800-123-4567 for quick answers and help!
Reviews
There are no reviews yet.