TEXA Front video camera calibration panel for SUBARU EYESIGHT2 with bubble level

Description

TEXA Front Video Camera Calibration Panel for Subaru EyeSight2 with Bubble Level (3911392)

Purpose-engineered for Subaru’s EyeSight2 stereo camera system, this manufacturer-specific calibration target panel is an essential tool for any shop performing windshield replacements on Subaru vehicles, completing collision repairs on EyeSight-equipped models, or removing and reinstalling the EyeSight camera bracket for any reason. Without the correct panel, proper recalibration of the EyeSight2 system after repair is not possible ÔÇö and when a stereo camera system goes uncalibrated, pre-collision braking, adaptive cruise control, and lane keep assist are all working from corrupted data.

What Sets EyeSight2 Calibration Apart

Unlike single-lens camera systems, Subaru EyeSight uses two cameras mounted side by side at the top of the windshield, operating as a matched stereo pair. The geometric relationship between those two lenses is the foundation for how the system calculates distance, closing speed, and lane positioning. When that geometry is off, so is the system’s depth perception ÔÇö and that is not simply a matter of triggering a warning light. It is a safety issue.

The stereo geometry requirement means calibration must be performed with a panel that both cameras can reference simultaneously and with high precision. Generic targets or improvised solutions will not deliver accurate results. This panel is built specifically for EyeSight2 and is used within the TEXA RCCS calibration framework.

The Bubble Level: A Calibration Requirement, Not a Convenience

The integrated bubble level on this panel is not an optional extra ÔÇö it is a functional necessity. Stereo camera systems are acutely sensitive to panel tilt. Even minor off-level positioning introduces angular error into the calibration process, which the cameras register as a permanent offset in their field of view. The bubble level provides the technician with direct physical confirmation that the target is positioned correctly before the calibration sequence starts. This removes one of the most common causes of calibration failure and return visits.

When Calibration Is Required

• Windshield replacement: The EyeSight cameras mount to the windshield glass or its attached bracket. Any glass-out job on an EyeSight-equipped Subaru requires a full recalibration.
• Camera bracket removal or adjustment: Any time the bracket is removed, disturbed, or repositioned for any reason, the system must be recalibrated before it can be considered reliable.
• Front-end collision repair: Structural work affecting the A-pillar, roof header, or firewall area can alter camera geometry and necessitate recalibration.
• Suspension or alignment changes: Depending on the scope of work and OEM requirements, significant suspension work may trigger an ADAS recalibration requirement. Always reference OEM service information for the specific vehicle.

How It Fits the TEXA RCCS Workflow

This panel integrates with the TEXA RCCS calibration structure and is compatible with the RCCS 2, RCCS 3, and RCCS 3 EVO frames. It mounts to or is positioned in front of the RCCS frame at the distance and height specified by TEXA’s IDC5 software for the particular Subaru model being serviced. TEXA IDC5, working alongside a TEXA Navigator interface ÔÇö either the NANO S or TXT ÔÇö guides the technician through vehicle-specific setup, target placement, and the full calibration sequence. The software communicates directly with the vehicle’s ADAS control unit to verify that calibration is complete and to store the results.

Which Shops Should Have This Panel

• Auto glass shops: If windshield replacement on Subaru vehicles is part of your business, this panel earns its keep quickly. EyeSight is standard or optional across a broad range of Subaru models and model years ÔÇö you will see it frequently.
• Collision repair shops: Front-end collision work on EyeSight-equipped Subarus demands camera recalibration. Releasing a vehicle without completing that calibration is both a liability concern and a violation of OEM requirements.
• General repair shops with TEXA RCCS equipment: If you already own an RCCS frame and are expanding your calibration coverage to include Subaru EyeSight2, this is the panel that completes that capability.

Compatibility

This panel is designed for Subaru EyeSight2 ÔÇö the second-generation EyeSight stereo camera system. For confirmation of compatible model years and trim levels, contact ADAS Calibration Tools directly. Subaru has deployed EyeSight across multiple generations and variants, and we can verify fitment for the specific vehicles in your market before you place an order.

What’s in the Box

• TEXA EyeSight2 front video camera calibration panel (part number 3911392)
• Integrated bubble level

The RCCS calibration frame (RCCS 2, RCCS 3, or RCCS 3 EVO), TEXA Navigator interface, and IDC5 ADAS software license are each required separately and sold separately.

Why Buy From ADAS Calibration Tools?

• ADAS specialist: ADAS Calibration Tools has sold and supported TEXA RCCS systems since the platform launched in North America. We understand the equipment and the calibration workflow inside and out.
• Free shipping: No freight surprises when you order panels or accessories.
• Free tech support: Call 800-123-4567 and reach someone who knows the TEXA ecosystem ÔÇö not a general support queue.
• Full manufacturer warranty: This panel is covered under TEXA’s standard warranty terms.
• Straightforward upgrade guidance: Not certain whether this panel is the right fit for your vehicle mix? We will give you a direct answer ÔÇö what works for your shop and what does not.

Call 800-123-4567 for fast answers and expert support!