Bosch VAG 360 Gen 2 Floor Mat Target

Description

Bosch VAG 360 Gen 2 Floor Mat Target ÔÇö VAG ADAS Camera Calibration for the DAS 3000

For shops that regularly service Volkswagen Group vehicles ÔÇö Volkswagen, Audi, SEAT, ┼áKODA, or Porsche ÔÇö the Bosch VAG 360 Gen 2 Floor Mat Target (CTA500-1) is the vehicle-specific calibration target that closes out windshield replacements, front-end repairs, and camera R&R jobs the right way. This is not a universal solution. It is purpose-built for VAG-platform vehicles and integrates with the Bosch DAS 3000 ADAS calibration frame as part of a structured, guided static recalibration procedure.

What This Target Does in the Shop

Current-generation VAG vehicles rely on forward-facing cameras ÔÇö and in many configurations, full surround-view and 360-degree camera arrays ÔÇö that demand precise static recalibration after any of the following service events:

• Windshield replacement ÔÇö The forward-facing camera mounts directly to the glass. When the glass comes out, calibration is required before the vehicle leaves the bay.
• Camera removal or reinstallation ÔÇö Any time the camera is unbolted from its mount, the aim baseline is broken. Static calibration re-establishes it.
• Front-end collision repair ÔÇö Changes to suspension geometry affect camera aim. Calibration is mandatory after any structural front-end work.
• ADAS system fault codes ÔÇö Many VAG diagnostic fault codes will not clear until a completed calibration cycle has been performed.

The floor mat component of this kit is positioned beneath the vehicle during the calibration procedure. It operates in tandem with the DAS 3000 frame’s wheel-hub thrust-angle alignment markers and the on-screen guided workflow delivered through the paired Bosch ADS 525X or ADS 625X scan tool. The system directs where to position the fixture, how to align it, and confirms when calibration has been successfully completed ÔÇö no estimating with a tape measure, no guesswork involved.

VAG 360 Gen 2 ÔÇö What Changed From Gen 1

The Gen 2 iteration of this target reflects revised calibration specifications issued by Volkswagen Group as newer model years have expanded their ADAS feature sets. If your shop is already running a DAS 3000 station with an earlier-generation VAG target, verify with Bosch or with ADAS Calibration Tools whether your current software level requires the Gen 2 board to maintain accurate coverage of recent model years. Using an outdated target board against current VAG platforms creates real risk ÔÇö an incomplete or incorrect calibration is a greater liability exposure than no calibration attempt at all.

System Compatibility ÔÇö What You Need to Use This Target

This target board is a component accessory, not a standalone calibration system. A complete VAG ADAS calibration setup requires:

• Bosch DAS 3000 calibration frame ÔÇö The structural fixture that holds this target at the precise height and angle required by the calibration procedure
• Bosch ADS 525X or ADS 625X scan tool ÔÇö Delivers the guided calibration workflow and handles vehicle communication
• Bosch ADAS Positioning (BAP) System (where required by vehicle procedure) ÔÇö Validates frame placement relative to wheel thrust angle
• This target (CTA500-1) ÔÇö The VAG-specific pattern board that the vehicle’s camera reads and interprets during static calibration

If you are configuring a new DAS 3000 station from the ground up, reach out to ADAS Calibration Tools first ÔÇö we will help you identify exactly which targets you need for your specific vehicle mix before you commit to a purchase.

Who Needs This Target Specifically

This target is the right investment for shops that see consistent volume on VAG-platform vehicles. Independent shops operating in markets with strong German-brand ownership, VW dealer-authorized service centers, collision repair facilities handling VAG insurance work, and Euro-specialist shops with Audi or Porsche clientele are the core buyers for this board. At $1,584, it is a deliberate capital purchase ÔÇö but for any shop currently turning away VAG ADAS calibration jobs or routing them to a subcontractor, the return calculation is straightforward.

Technical Notes

• SKU: CTA500-1
• Platform: VAG Group (Volkswagen, Audi, SEAT, ┼áKODA, Porsche) ÔÇö exact model-year coverage available on request
• Generation: Gen 2 (updated for current VAG calibration procedures)
• Required system: Bosch DAS 3000 + ADS 525X or ADS 625X
• Calibration type: Static (vehicle stationary, target board positioned per on-screen guidance)
• Application: Forward-facing and 360-degree camera systems on VAG platforms

Why Buy From ADAS Calibration Tools?

ADAS Calibration Tools has been focused exclusively on professional diagnostic and ADAS calibration equipment. We carry Bosch DAS 3000 systems, targets, and supporting accessories ÔÇö and more importantly, we understand how every piece of the system connects. If you have questions about whether this is the correct target for your vehicle coverage or how it integrates with your current DAS 3000 setup, call us before placing an order. You will get a direct, honest answer ÔÇö not a pitch.

• Free shipping on orders to the continental US
• Free tech support ÔÇö call 800-123-4567 with setup or compatibility questions
• Full manufacturer warranty ÔÇö Bosch stands behind their calibration equipment
• Honest upgrade guidance ÔÇö if you need a different target or a complete system, we will tell you

Call 800-123-4567 for quick answers and help!