Bosch Target, Nissan2, ADAS

Description

Bosch CTA212-1 Nissan ADAS Calibration Target Board

The Bosch CTA212-1 is a Nissan-specific static calibration target board engineered for use with the Bosch DAS 3000 ADAS recalibration system. Shops performing windshield replacements, front-end repairs, or camera R&R on Nissan vehicles mount this board to the DAS 3000 fixture to give the forward-facing camera a verified reference pattern to calibrate against. Without the correct manufacturer-specific target in place, the DAS 3000 simply cannot complete a static calibration on Nissan platforms ÔÇö your only other option is sending the vehicle to the dealership.

What This Target Does

Static ADAS calibration involves positioning a precisely printed, manufacturer-specified target board at a defined distance and angle directly in front of the vehicle. The camera ECU reads that pattern and uses it to verify or reset its field-of-view parameters. The CTA212-1 is built to Nissan’s published calibration specifications ÔÇö the pattern geometry, sizing, and contrast ratios are exactly what Nissan’s camera system is designed to recognize. Using a generic or mismatched target results in either an outright failed calibration or, more dangerously, a calibration that passes the tool check while leaving the camera misaligned in real-world operation.

How It Fits Into the DAS 3000 Workflow

• Mounts to the DAS 3000 frame: The CTA212-1 attaches directly to the Bosch DAS 3000 recalibration fixture, which manages positioning through wheel-hub thrust-angle markers and on-screen guided placement instructions.
• Used with Bosch ADS 525X or 625X: The scan tool initiates the calibration routine and maintains communication with the vehicle’s ADAS control module throughout the entire procedure.
• Pairs with BAP System when required: For vehicles or procedures calling for the Bosch ADAS Positioning system, the DAS 3000 frame and this target operate alongside it seamlessly.
• Static calibration only: This target board is designed for stationary, in-shop calibration procedures. Dynamic calibration ÔÇö the drive-based process ÔÇö is handled separately through the scan tool and does not require a target board.

When You Need This Target

• Windshield replacement on equipped Nissan models: Any Nissan with a forward-facing camera mounted to or near the windshield requires static recalibration following glass R&R. The CTA212-1 is the correct target for that procedure.
• Camera removal and reinstall: Whenever the camera unit is physically removed ÔÇö for repair, replacement, or access to other components ÔÇö recalibration must be completed before returning the vehicle to service.
• Front-end collision repair: Suspension geometry changes, bumper R&R, or any repair that could affect camera mounting angle or vehicle ride height may trigger a recalibration requirement. Consult OEM repair procedures for the specific threshold on each model.
• Camera bracket or mount replacement: Replacing the bracket the camera mounts to changes its physical orientation relative to the vehicle. Static recalibration with this target is the proper corrective procedure.

What’s Included

• CTA212-1 Nissan2 ADAS calibration target board
• Designed for use with the Bosch DAS 3000 recalibration fixture

Note: The DAS 3000 frame, ADS scan tool, and BAP system are each sold separately. Verify that your DAS 3000 system is fully configured before ordering this target board. If you’re assembling a DAS 3000 setup and want guidance on the complete system configuration for your shop’s vehicle mix, reach out to ADAS Calibration Tools ÔÇö we can help you determine which target boards your operation actually requires and which ones you can skip.

Nissan Vehicle Coverage

The CTA212-1 covers Nissan models equipped with forward-facing camera-based ADAS systems. Confirmed model-year and trim-level applicability depends on which vehicles in your market were originally equipped with the relevant camera systems. For verified vehicle coverage, consult the Bosch ADAS application guide or contact our tech support team ÔÇö we’d rather confirm fitment before you order than sort it out after the fact.

Why Buy From ADAS Calibration Tools?

• Specialist: Our focus is exclusively professional diagnostic equipment. We understand the Bosch DAS 3000 ecosystem and can help you put together a complete, properly configured system for your shop.
• Free shipping: No handling fees, no unexpected charges at checkout.
• Free tech support: Call 800-123-4567 and speak with someone who genuinely understands ADAS calibration workflows ÔÇö not a general customer service representative reading from a script.
• Full manufacturer warranty: Every Bosch product we sell carries the complete Bosch warranty. No grey-market sourcing, ever.
• Straight answers: If a different target board suits your vehicle mix better, or if this board isn’t the right fit for your current DAS 3000 configuration, we’ll tell you upfront.

Call 800-123-4567 for fast answers and expert guidance!