Autel Set of Calibration Mats for Subaru CSC1014-17-18A-18B

Description

Autel Set of Calibration Mats for Subaru ÔÇö CSC1014-17-18A-18B

Engineered specifically for Subaru EyeSight and ADAS static calibration, this four-mat set works within Autel’s CSC (Calibration Standard Components) frame system. For any shop performing Subaru windshield replacements, EyeSight camera replacements, or front-end repairs on EyeSight-equipped vehicles, these mats are not optional ÔÇö they are a required component of the calibration procedure. Generic targets cannot be substituted, and the mat-based positioning step cannot be bypassed.

What This Set Is and What It Does

Autel’s ADAS calibration workflow depends on vehicle-specific mats and targets built to exact tolerances. This set includes four mats identified by part suffixes 17, 18A, 18B, and the base CSC1014 designation ÔÇö each corresponding to distinct Subaru calibration procedures within Autel’s software. The mats establish the ground-level reference pattern the system uses to verify camera alignment against the vehicle centerline and ground plane. If the correct mats are not in place, Autel’s software will not advance through the static calibration sequence and will mark the procedure as incomplete.

• Purpose: Subaru EyeSight stereo camera and ADAS static calibration using the Autel CSC frame
• Mat count: Full set of four mats (CSC1014, -17, -18A, -18B) covering multiple Subaru calibration scenarios
• Use with: Autel CSC calibration frame paired with MaxiSYS Ultra, MS909, MS919, or Elite II diagnostic tablets running Autel ADAS software
• Calibration type: Static (in-shop, target-based) ÔÇö no road drive required when these mats are used correctly
• Trigger conditions: Required after windshield R&R, EyeSight camera replacement or adjustment, front-end collision repair, or any procedure that disturbs camera aim on Subaru EyeSight vehicles

Who Needs This Set

This mat set is designed for shops that already own the Autel CSC frame and are regularly seeing Subaru EyeSight vehicles come in for windshield work or collision-related camera recalibration. Subaru EyeSight relies on a dual stereo camera mounted at the top of the windshield ÔÇö every windshield replacement on an EyeSight-equipped model makes stereo camera recalibration mandatory before the vehicle can be safely returned to the customer.

Whether you operate a glass shop expanding into ADAS calibration as a revenue line or a collision center managing Subaru repair volume, this mat set is what transforms your existing Autel CSC frame into a Subaru-ready calibration station. The Autel software will not proceed through Subaru procedures without the correct mats ÔÇö your CSC frame is simply not capable of those calibrations without them.

This is a required consumable component for specific Subaru calibration procedures ÔÇö not a general-purpose accessory. If you are uncertain whether your current procedure list demands all four mats in this set, reach out to ADAS Calibration Tools and we will review the vehicle coverage with you before you place an order.

Compatibility and Software Requirements

• Frame: Autel CSC (Calibration Standard Components) frame ÔÇö required, sold separately
• Tablet: MaxiSYS Ultra, MS909, MS919, or Elite II with current Autel ADAS software subscription
• Vehicle coverage: Subaru models equipped with EyeSight stereo camera system ÔÇö exact model-year coverage confirmed in Autel ADAS software vehicle selection menu
• Calibration mode: Static in-bay calibration; requires level floor and adequate ceiling height per Autel CSC setup requirements

Practical Notes for Your Shop

Autel calibration mats are precision-printed and require flat storage, a clean surface, and protection from physical damage. A mat that is creased, soiled, or faded will cause the camera recognition step to fail or produce inconsistent results. Store mats rolled or flat inside a protected case whenever they are not in use. If a mat sustains damage, replace it immediately ÔÇö running a calibration with a compromised mat wastes bay time and creates the risk of an inaccurate result that won’t surface until a road test or a customer complaint.

The $1,149.99 price for this four-mat set reflects the vehicle-specific engineering and precision printing Autel builds into every CSC accessory. Weigh that investment against the liability exposure of releasing a Subaru EyeSight vehicle with an uncalibrated or improperly calibrated stereo camera system.

Why Buy From ADAS Calibration Tools?

ADAS Calibration Tools has focused exclusively on professional ADAS and diagnostic equipment. We carry Autel’s complete CSC accessory line and can confirm exactly which mats your Subaru procedures require before you commit to an order. Every order ships free. Our technical support staff are hands-on users of this equipment ÔÇö contact us before purchasing if you need help matching mats to your CSC frame configuration or verifying Subaru model-year coverage. Full manufacturer warranty applies on every unit we sell. If a different configuration suits your shop better, we will tell you that plainly rather than push the wrong product.