Autel MaxiSYS MS919 S2 Diagnostic Tablet with VCMI2

Description

Autel MaxiSYS MS919 S2 ÔÇö Professional Diagnostic Tablet with 6-in-1 VCMI2

Built for shops that demand both advanced diagnostics and serious electrical testing capability, the Autel MaxiSYS MS919 S2 pairs an 11-inch Android 13 tablet with the MaxiFLASH VCMI2 ÔÇö a compact, all-in-one vehicle communication and measurement unit. The VCMI2 integrates a VCI, J2534 pass-through programmer, 4-channel oscilloscope, waveform generator, multimeter, CAN bus tester, and standalone Remote Expert box into a single device. Among Autel’s current non-Ultra tablet offerings, the MS919 S2 stands at the top for technicians who need full diagnostic depth alongside genuine electrical diagnostic hardware.

The MaxiFLASH VCMI2 ÔÇö 6-in-1 Measurement Device

What sets the MS919 S2 apart from the MS909 S2 is the VCMI2 hardware it ships with:

• VCI ÔÇö wireless vehicle communication with full multi-protocol support
• J2534 pass-through ÔÇö OEM software module programming and reflashing
• 4-channel oscilloscope ÔÇö simultaneous four-channel waveform display for ignition, injection, sensor, and actuator diagnostics
• Waveform generator ÔÇö generate test signals for component and circuit testing
• Multimeter ÔÇö voltage, resistance, and current measurements
• CAN bus tester ÔÇö verify network signal integrity and diagnose communication faults
• Standalone Remote Expert box ÔÇö enables Remote Expert connections independently of the tablet

The MS919 S2’s split-screen functionality allows oscilloscope waveforms and live scan data to be displayed together on the same 11-inch screen at the same time ÔÇö a critical capability when correlating electrical signals with live PIDs during active diagnosis.

Diagnostic Software Capabilities

• Full OE-level system access ÔÇö all modules, all systems on 1996 and newer U.S., Asian, and European vehicles
• Bi-directional control ÔÇö actuator tests, component activation, output commands
• Coding and adaptations ÔÇö module programming, variant coding, OE-level adaptations
• 45+ service reset functions ÔÇö oil, EPB, SAS, BMS, DPF, IMMO, TPMS, and more with one-tap access
• All 10 OBDII test modes ÔÇö live data, freeze frame, O2 tests, Mode 6
• Pre- and post-scan reporting ÔÇö documented scan reports for collision and insurance documentation
• Topology 3.0 dynamic network analysis ÔÇö ping and monitor individual module communications across multiple networks
• Enhanced PID analysis ÔÇö Live Data Fusion, Reference Sampling, Parameter Graphing, and Real-time Split-Screen with oscilloscope
• Security gateway access ÔÇö authorized by Mercedes-Benz, Nissan, VW/Audi, and Stellantis (AutoAuth account required; VW/Audi on-tool token/sub purchase)
• Remote Expert ready ÔÇö standalone box enables remote connection with OE-level programming experts
• MAX digital vehicle inspection app ÔÇö multi-point digital inspection workflow
• Hands-free navigation assistant
• MOTOR TruSpeed ÔÇö one year of free integrated repair data
• Diesel DPF/emissions resets ÔÇö light and medium-duty diesel

MS909 S2 vs. MS919 S2 ÔÇö The Clear Difference

The diagnostic software running on both tablets is identical. The choice between them is entirely about the VCI that comes in the box:

• MS909 S2 ÔÇö MaxiFLASH VCI2 (VCI + J2534 only). No oscilloscope.
• MS919 S2 ÔÇö MaxiFLASH VCMI2 (VCI + J2534 + 4-channel scope + multimeter + waveform gen + CAN tester + Remote Expert standalone)

For technicians who regularly reach for a scope during electrical diagnostics, the MS919 S2 removes the need for a separate oscilloscope purchase and consolidates everything onto one device. Sourcing the VCMI2 separately as part of the MSOAK accessory kit complement would cost close to the price difference between the two models. For high-volume diagnostic shops, the MS919 S2 is the more practical investment.

Hardware Specifications

• Operating System: Android 13
• Processor: Octa-core, 2.7 GHz
• Memory: 12GB RAM / 256GB onboard storage
• Display: 11-inch anti-glare screen, 2176 x 1600 resolution
• Battery: 15,000mAh 3.8V; USB-C 45W PD fast charging
• Weight: 1,656.5 g (3.65 lbs)
• Dimensions: 315.4 x 240.3 x 39.0 mm (12.42″ x 9.46″ x 1.54″)
• Connectivity: Wi-Fi 6.0 dual band (802.11 a/b/g/n/ac/ax 2×2 MIMO), Bluetooth 5.2, GPS, 2x USB-A, USB-C, HDMI 2.0, SD card up to 256GB
• Camera: 16MP rear autofocus with flash, 16MP front
• Operating Temperature: 0 to 50┬░C (32 to 122┬░F)
• Storage Temperature: -10 to 60┬░C (14 to 140┬░F)

Protocol Support

PLC J2497, ISO-15765, SAE-J1939, ISO-14229 UDS, SAE-J2411 (GMLAN), ISO-11898-2, ISO-11898-3, SAE-J2819 (TP20), TP16, ISO-9141, ISO14230, SAE-J2610 (Chrysler SCI), SAE-J2809 (Honda Diag-H), SAE-J2740 (GM ALDL), SAE-J1567 (CCD BUS), Ford UBP, Nissan DDL UART, BMW DS2, BMW DS1, SAE J2819 (VAG KW81/KW82), SAE J1708, SAE-J1850 PWM (Ford SCP), SAE-J1850 VPW (GM Class2), ISO 13400 (DoIP), CAN FD

What Is Included

• Autel MaxiSYS MS919 S2 tablet (Android 13)
• MaxiFLASH VCMI2 (6-in-1: VCI, J2534, 4-channel scope, multimeter, waveform gen, CAN tester, Remote Expert box)
• OBD2 cable, 12V/6A DC power adapter, USB-C cable
• Carrying case
• One-year limited warranty
• One year of free software updates via Wi-Fi
• One year of free MOTOR TruSpeed repair data access

Why Buy the MS919 S2 From ADAS Calibration Tools?

ADAS Calibration Tools has specialized in professional diagnostic and ADAS calibration equipment. We carry the complete Autel MS-series lineup and can help you work through the MS909 S2 vs. MS919 S2 decision quickly and without a sales pitch. Every order includes free shipping, the full manufacturer warranty, and free technical support ÔÇö no upsells, no runaround. If you’re trying to determine whether this is the right tool for your shop’s workflow and vehicle mix, or whether a different configuration makes more sense, call us for a straight answer.

Call 800-123-4567 for quick answers and help!