Autel HONDA LDW

Description

Autel Honda LDW Calibration Target (CSC0601/24)

The Autel CSC0601/24 is a Honda-specific Lane Departure Warning (LDW) calibration target built for use within the Autel MaxiSYS ADAS calibration system. For any shop performing Honda or Acura windshield replacements, front camera removal and reinstallation, or front-end repairs that disturb a forward-facing camera, this is the target that makes static calibration achievable ÔÇö correctly and repeatably.

Honda and Acura LDW and lane-keeping systems demand a vehicle-approved target placed at a manufacturer-specified distance and height directly in front of the vehicle. The CSC0601/24 mounts to the Autel CSC frame and delivers a documented, repeatable calibration procedure every time ÔÇö no approximations, no workarounds.

What This Target Does

• Honda/Acura LDW Static Calibration: Supplies the correct pattern and dimensions required by Honda’s camera calibration procedure for lane departure warning systems.
• CSC Frame Compatible: Attaches directly to the Autel Calibration Standard Component (CSC) frame. The frame handles positioning at the correct height and distance; the software walks the technician through the alignment sequence.
• Software-Guided Workflow: Operates with a MaxiSYS tablet (Ultra, MS909, MS919, or Elite II) running Autel ADAS software. The software specifies setup distances, confirms vehicle identification, and records calibration results.
• Static Calibration Method: Target-based static calibration is completed in the shop with the vehicle stationary ÔÇö no road drive is required for the initial calibration step.
• Documented Results: Calibration data is logged through the MaxiSYS tablet, providing a record for the repair order and the vehicle owner.

When Does a Shop Need This?

Any Honda or Acura equipped with an LDW system that has undergone a windshield replacement, forward camera removal or repositioning, or front suspension or subframe disturbance will require LDW camera recalibration. This is not discretionary ÔÇö Honda’s repair procedures mandate it, and insurers are increasingly auditing compliance.

If your shop already operates the Autel CSC frame for other vehicle makes, the CSC0601/24 is a straightforward add-on target that extends your Honda and Acura coverage. If you are building Honda ADAS capability from the ground up, you will need the CSC frame, this target, and a compatible MaxiSYS tablet to complete the setup.

What’s Included

• CSC0601/24 Honda LDW calibration target panel
• Mounting hardware for CSC frame attachment
• Carry/storage case (confirm with order ÔÇö case inclusion may vary by configuration)

Exact contents are confirmed at order. Contact us at 800-123-4567 if you need a packing list before purchase.

Compatible Vehicles

Designed for Honda and Acura vehicles equipped with Lane Departure Warning camera systems. Specific model-year coverage is determined by the Autel ADAS software version installed on your tablet. Check the Autel vehicle coverage list for your tablet firmware version, or reach out to ADAS Calibration Tools and we will verify coverage for the specific Honda and Acura models in your bay.

What You Need to Run This

• Autel CSC Frame ÔÇö the calibration stand the target mounts to
• MaxiSYS Tablet ÔÇö Ultra, MS909, MS919, or Elite II with current ADAS software
• Level shop floor ÔÇö static calibration requires a flat, level surface with adequate clear space in front of the vehicle
• Active Autel ADAS software subscription ÔÇö required to execute calibration procedures

Where This Fits in the Autel ADAS Lineup

The CSC0601/24 is a vehicle-specific target ÔÇö one of many in Autel’s expanding target library. Shops running multiple makes build out their target set progressively. The CSC frame and MaxiSYS tablet are the core investment; targets like this one are the per-make additions that extend your capability. At $499.99, this target recovers its cost quickly for any shop where Honda and Acura windshield and camera work represents consistent volume.

For shops looking to combine wheel alignment and ADAS in a single system, Autel also offers the IA900WA. For mobile operations, the MA600 frame is worth considering. Contact ADAS Calibration Tools and we can outline which configuration best matches your shop’s actual workflow and ticket volume.

Why Buy From ADAS Calibration Tools?

• ADAS Specialists: We sell and support Autel ADAS equipment daily. We know which targets pair with which frames and which tablets, and we will give you a straight answer about whether this is or isn’t the right fit for your shop.
• Free Shipping: No handling fees, no surprises at checkout.
• Free Tech Support: Call 800-123-4567 and speak with someone who knows the CSC system in depth ÔÇö not a general customer service representative.
• Full Manufacturer Warranty: Backed by Autel’s warranty with ADAS Calibration Tools’ support behind it.
• Honest Upgrade Guidance: If your shop needs more than this target, we will tell you. If this is all you need, we will tell you that too.

Call 800-123-4567 for quick answers and help!