Autel Corner Reflector with Stand CSC802-01 and CSC800

Description

Autel Radar Corner Reflector with Stand (CSC802-01 and CSC800)

The CSC802-01 paired with the CSC800 stand is Autel’s complete radar corner reflector assembly for static ADAS calibration of radar-based vehicle safety systems. Priced at $860, this listing covers the full ready-to-use assembly ÔÇö both the reflector and the stand ÔÇö not a stand-only or reflector-only component. If you are building out radar ADAS calibration capability and want everything in a single purchase, this is the product to order.

What This Does

Vehicles equipped with adaptive cruise control, forward collision warning, automatic emergency braking, and other radar-dependent safety systems must have their radar sensors recalibrated any time the sensor’s position is disturbed ÔÇö whether from a front-end collision repair, bumper removal, or sensor remounting. The corner reflector establishes a precise radar reflection point in front of the vehicle, which the Autel calibration software references to bring the sensor back to its factory-calibrated baseline.

What Is Included

• Corner reflector (CSC802-01) ÔÇö OE-sized reflective element designed for radar calibration procedures
• Stand with base (CSC800) ÔÇö vertical positioning stand with a weighted base for stable, repeatable placement
• Attachment handle for reflector positioning
• 1-year limited warranty

Frame System Compatibility

This reflector and stand assembly works with both of Autel’s ADAS frame platforms:

• Autel ADAS Standard Frame ÔÇö suited for fixed bay installations
• Autel MA600 Mobile Frame ÔÇö suited for portable or mobile ADAS setups

Required Tablet and Software

The corner reflector hardware alone does not execute a calibration. Completing a radar calibration with this assembly also requires:

• MaxiSYS ADAS tablet (such as the MS909, MS919, or another ADAS-capable MaxiSYS unit) with ADAS software installed ÔÇö OR ÔÇö
• MaxiSYS 908 Series tablet with the ADAS Software Upgrade purchased and activated

Autel’s ADAS software delivers vehicle-specific positioning instructions ÔÇö reflector distance, height, and placement ÔÇö and then walks the technician through the calibration sequence step by step. Without an ADAS-capable tablet running current software, this hardware cannot complete a calibration on its own.

CSC802-01 vs. CSC0800 ÔÇö Which Do You Need?

• CSC802-01 with CSC800 (this product, SKU 802-01, $860): The complete assembly ÔÇö corner reflector and stand together. Order this if you are establishing radar calibration capability from the ground up or need a full replacement of the entire assembly.
• CSC0800 stand only (SKU 800, $425): Stand hardware without a reflector. Order this if you already have an OE corner reflector and only need the positioning stand, or are replacing a stand that was damaged.

The majority of shops require the complete CSC802-01 set. The CSC0800 stand-only option applies to specific scenarios where the reflector is already in hand.

Radar Calibration vs. LDW Camera Calibration

These are two distinct calibration types worth distinguishing: radar calibration (what this tool handles) is separate from LDW camera calibration. Many current vehicles require both ÔÇö radar for ACC/FCW/AEB functions, and camera targets for LDW and lane-keeping functions. Shops building a complete ADAS capability need both radar calibration hardware like this product and the appropriate camera calibration targets for the vehicle makes they service.

Who Needs This

Any shop performing post-collision ADAS recalibration on radar-equipped vehicles. Front-end collision repair increasingly makes this a required service rather than an optional one. Glass shops also need this equipment when sensor replacement accompanies windshield work on vehicles with radar-based safety systems.

Why Buy the Autel Corner Reflector with Stand CSC802-01 and CSC800 From ADAS Calibration Tools?

ADAS Calibration Tools has specialized in professional automotive diagnostic and calibration equipment. We stock the full Autel ADAS hardware lineup and can help you determine exactly what you need to build a complete radar and camera calibration setup for your shop’s vehicle mix.

• Free shipping on qualifying orders
• Free tech support ÔÇö call 800-123-4567
• Full manufacturer warranty honored
• Honest configuration guidance ÔÇö we will tell you which tablet, software version, and frame system you need to put this reflector to work in your shop

We don’t just sell the hardware ÔÇö we help you configure it for your workflow and the vehicles you service. If you’re weighing whether this assembly is the right fit or whether a different configuration makes more sense, call us for a straightforward answer, not a sales pitch.

Call 800-123-4567 for quick answers and help!