Autel Corner Reflector for Toyota, Honda and Subaru CSC0802-10

Description

Autel Corner Reflector for Toyota, Honda and Subaru ÔÇö CSC0802-10

The Autel CSC0802-10 Corner Reflector is an OE-sized radar calibration target engineered specifically for Toyota, Honda, and Subaru platforms. For shops performing Blind Spot Monitoring (BSM) calibrations on these vehicles, this is the hardware component that ensures the radar sensor receives the precise signal return it needs during the calibration procedure.

Corner reflectors function by redirecting radar energy back toward the vehicle’s radar sensor at exact angles. The OE-sized designation is critical ÔÇö Autel engineered this reflector to replicate the specific radar cross-section signature used at the factory, so the sensor recognizes the return signal as valid. An undersized, oversized, or generic reflector can produce a calibration result that satisfies the tool’s pass criteria while failing to deliver real-world accuracy on the road.

Vehicle Coverage

• Toyota vehicles equipped with BSM radar systems
• Honda vehicles equipped with BSM radar systems
• Subaru vehicles equipped with BSM radar systems

What This Reflector Does

• Performs radar system calibrations for Blind Spot Monitoring (BSM) systems
• OE-sized corner reflector unit ÔÇö replicates the factory radar cross-section specification
• Placed as a stationary target at manufacturer-required positions alongside the vehicle during calibration

How the Calibration Process Works

When performing a BSM calibration, the reflector is set at manufacturer-specified positions beside the vehicle. The Autel ADAS calibration system ÔÇö such as the IA800 or MA600 ÔÇö directs placement, and the vehicle’s diagnostic software executes the calibration routine while the radar sensor reads returns off the reflector’s surface. Without a correctly sized corner reflector, BSM calibration on these three vehicle brands cannot be performed accurately.

The CSC0802-10 is intended as either a replacement or an add-on component. If your shop already operates an Autel ADAS frame and scanner but needs to extend coverage to Toyota, Honda, or Subaru BSM systems ÔÇö or if an existing reflector has been damaged ÔÇö this is the direct Autel-sourced part to bring your setup back to full capability.

Technical Notes

• SKU: 802-10
• Part Number: CSC0802-10
• Warranty: One-year Limited Warranty from Autel
• Compatible with Autel ADAS calibration frame systems

What’s Included

• OE-sized Corner Reflector unit (CSC0802-10)

Note: Stand, frame, and compatible Autel ADAS scanner are sold separately.

Why Buy the Autel Corner Reflector for Toyota, Honda and Subaru CSC0802-10 From ADAS Calibration Tools?

ADAS Calibration Tools has specialized in professional-grade ADAS calibration equipment. We carry the full Autel ADAS ecosystem ÔÇö frames, targets, reflectors, and scanners ÔÇö and our team can pinpoint exactly which components your current setup requires. Every order includes free ground shipping, free technical support, and the complete manufacturer warranty.

We don’t simply move hardware ÔÇö we help you configure the right solution for your shop’s vehicle mix and workflow. If you’re evaluating whether this reflector is the right fit or whether a different configuration better suits your needs, reach out for a straight answer rather than a sales pitch.