Autel Calibration Bar for Camera Based Systems

Description

Autel Calibration Bar for Camera-Based Systems (CSC0500-10)

Built as a dedicated component within Autel’s ADAS calibration platform, the Autel Calibration Bar for Camera-Based Systems is engineered for static, target-based calibration of forward-facing cameras, lane departure warning systems, and other vision-driven driver assistance technologies. Whether your shop handles windshield replacements, front-end collision repairs, or camera R&R on late-model vehicles, this bar gives you the mounting and positioning structure required to meet OEM calibration procedures for vision-based systems.

This is not a standalone solution ÔÇö it is a precision component that operates within the Autel ADAS ecosystem, integrating with the Autel CSC (Calibration Standard Components) frame system and working alongside a MaxiSYS diagnostic tablet (Ultra, MS909, MS919, or Elite II) running Autel ADAS software. The bar delivers the stable, repeatable horizontal mounting surface needed to place optical targets at the exact height and distance each camera calibration procedure demands.

What This Bar Does

• Static Camera Calibration Support: Positions calibration targets at the precise height required for front-facing camera calibration ÔÇö the type of calibration needed after windshield replacement or camera R&R on vehicles equipped with lane keep assist, automatic emergency braking, and adaptive cruise control.
• Engineered for the Autel CSC Frame: Designed to integrate directly with Autel’s CSC calibration frame system. This is not a generic aftermarket bar ÔÇö it is built to Autel’s tolerances for consistent, repeatable target placement every time.
• Horizontal Target Mounting Rail: Provides a stable horizontal surface for attaching vehicle-specific calibration targets, keeping them level and correctly positioned so calibration procedures pass on the first attempt rather than requiring repeated repositioning.
• Multi-System Compatibility: Used in calibrating front cameras, AVM (around-view monitoring) cameras, and other vision-based systems that depend on a physical target pattern within the vehicle’s field of view.
• Modular Platform Component: Autel’s ADAS calibration platform is built to be modular. This bar can expand an existing shop setup or serve as a direct replacement for a damaged bar within a current CSC configuration.

Who Needs This

This calibration bar is the right purchase for shops that already have ÔÇö or are actively building ÔÇö an Autel ADAS calibration setup and need the camera calibration bar specifically. Typical buyers include:

• Auto Glass and Windshield Shops: Any windshield replacement on a camera-equipped vehicle now requires a recalibration step. For shops doing high-volume glass work, this bar is part of the essential tooling required to complete those jobs correctly.
• Collision Repair Centers: Front-end impacts routinely trigger ADAS recalibration requirements. The camera bar handles the vision-system side of that post-repair workflow.
• General Repair Shops Expanding into ADAS: Independent shops adding ADAS calibration capability to recapture work currently going to dealerships or dedicated calibration services.
• Shops Replacing or Supplementing an Existing Autel ADAS Setup: If you already have the CSC frame and need this camera bar as a replacement component or additional unit, this is the correct SKU to order.

How It Fits the Autel ADAS Workflow

When using this bar in Autel’s guided calibration process, the MaxiSYS tablet first identifies the vehicle and retrieves the applicable OEM calibration procedure. It then instructs the technician on exactly where to position the targets ÔÇö the required distance from the vehicle, the correct height, and the lateral placement. The calibration bar provides the physical structure to mount those targets accurately. Once everything is in position, the tablet steps through the full calibration sequence and reports a clear pass or fail result. Target distances and bar height settings are always vehicle-specific and software-guided ÔÇö the system directs placement at every step.

Technical Notes

• SKU: AULCSC0500-10
• Compatible System: Autel CSC (Calibration Standard Components) ADAS frame platform
• Requires: Autel MaxiSYS diagnostic tablet with ADAS software license (Ultra, MS909, MS919, or Elite II) and compatible vehicle-specific calibration targets
• Calibration Types Supported: Static, target-based camera calibration
• Exact dimensional specs and full vehicle coverage list: Available on request ÔÇö contact us at 800-123-4567

What’s Not Included

This listing covers the calibration bar component only. The full CSC frame, calibration targets, and MaxiSYS tablet are not included. If you are putting together a complete Autel ADAS setup from the ground up, reach out to us ÔÇö we can build a quote for the full configuration that fits your shop’s vehicle mix and available floor space.

Why Buy From ADAS Calibration Tools?

• Authorized Autel Dealer: We know the Autel ADAS product line inside and out ÔÇö we can tell you exactly which components your setup requires and help you avoid buying parts you don’t need.
• Free Ground Shipping: Included on this and all qualifying orders.
• Free Tech Support: Call 800-123-4567 and speak with someone who actually works with this equipment. We’ll help you get the right configuration the first time.
• Full Manufacturer Warranty: Every Autel product we sell carries the complete factory warranty ÔÇö no gray market, no exceptions.
• Straightforward Upgrade Guidance: If a different configuration is a better fit for your operation, we’ll say so. Getting you the right tool once matters more to us than a quick sale on the wrong one.

Call 800-123-4567 for fast answers and expert help!