Autel AI1000 ADAS System with Digital Targets

Description

Autel MaxiSYS IA1000 ADAS Calibration & Wheel Alignment System ÔÇö Digital Targets Package

Built for shops that need to process modern camera, radar, and sensor calibration at production volume, the Autel IA1000 is a fully automated, in-shop ADAS calibration and wheel alignment system. This Digital Targets package (P/N IA1000TDT) brings together the IA1000 frame with its complete accessory set, the MaxiSYS Ultra S2 diagnostic tablet with ADAS activation, three digital target monitors, and the Digital Target Activation Card ÔÇö a complete solution for forward-facing camera and digital-display-based ADAS calibrations that eliminates the need for an entire wall of physical target boards.

Priced at $32,999, the IA1000TDT sits between the frame-only packages and the All Systems bundles ÔÇö the logical choice for a collision shop, ADAS calibration center, or dealership handling high volumes of windshield replacements, front-camera R&R, and radar work but not yet requiring the full physical LDW target library. If your vehicle mix trends toward makes where digital targets satisfy the calibration procedure, this package removes the storage demands, retrieval time, and condition management headaches of maintaining a large physical target set.

5-Way Robotic Target Positioning

• How it works in practice: Place the frame anywhere within the green distance and offset tolerance zone, press Next, and the IA1000 takes over ÔÇö automatically moving the target into the correct position across six axes: front-to-back, vertical, horizontal, pitch, roll, and yaw. No manual measuring. No manual adjusting.
• The outcome: Setup time drops dramatically compared to manual frame positioning, and calibration failures from targeting errors become far less common.
• Laser-guided positioning for Blind Spot (BSD), ACC radar, and AVM (surround view) patterns eliminates human setup error on systems where millimeter-level precision is non-negotiable.
• Unlevel floor compensation: Whether you’re on a level floor, a sloped drainage surface, or a rack, you select the appropriate condition and the system compensates ÔÇö delivering a successful calibration regardless of shop floor irregularities.

Digital Target Display System (3 Monitors Included)

• Three included digital target monitors eliminate the need to store, retrieve, and maintain dozens of make/model-specific physical target boards for covered calibration procedures.
• The software automatically projects the correct target ÔÇö techs don’t manually select boards, and there’s no risk of pulling the wrong pattern for the job.
• Self-adjusting screen brightness maintains optimal target visibility across varying shop lighting environments.
• OTA updates push new vehicle coverage directly to the monitors as Autel expands its target library ÔÇö no additional hardware investment required as software coverage grows.
• Digital monitors significantly reduce physical storage requirements compared to maintaining a complete set of printed pattern boards.

Advanced Wheel Alignment ÔÇö Integrated, Not Bolted On

• 0.02┬░ accuracy delivered through six HD optical cameras and precision-engineered wheel clamp targets ÔÇö going well beyond a standard camber/caster/toe readout.
• The full measurement suite includes thrust angle, SAI (steering axis inclination), toe out on turns, plus measurements that expose frame alignment issues, engine cradle alignment problems, bent components, and loose parts.
• Why this matters for ADAS work: Eleven of 28 major North American automakers ÔÇö including Ford, Volkswagen, Jeep, Kia, Dodge, and Subaru ÔÇö require ADAS calibration to follow wheel alignment. Running these as separate workflows on separate equipment creates documentation gaps and the real risk of calibrating a camera on a vehicle that still has an uncorrected alignment condition.
• The IA1000 consolidates alignment and ADAS calibration into a single pre/post-scan report chain ÔÇö one system, one report, documentation that’s ready for insurers.

Powered by MaxiSYS Ultra S2

• 13.7-inch Android touchscreen tablet, 512 GB storage
• 6-in-1 vehicle communication and measurement device ÔÇö diagnostics, oscilloscope, multimeter, and more, all in a single module
• Coverage: U.S., Asian, and European vehicles, 1996 and newer
• Topology 3.0: OE-style system analysis of multi-speed communication protocol networks ÔÇö a genuine network analyzer, not just a code reader
• Active Module and Network Analysis: Directly locate and ping ECUs to evaluate signal quality and network integrity
• Active tests, special functions, coding, and adaptations ÔÇö the full diagnostic capability expected from a tablet purpose-built for collision and calibration environments

ADAS System Coverage

• Static calibrations (target-based, in-shop): forward-facing cameras (LDW/LKAS), ACC radar, night vision, surround-view (AVM), blind-spot systems
• Dynamic calibrations (road-drive procedures): supported on vehicles where the OEM procedure requires a drive cycle to complete the calibration
• Guided ADAS: Pair the IA1000 with a local OE subscription or OE tool for late-model vehicles where aftermarket software coverage lags OEM release dates ÔÇö the IA1000’s optical positioning manages frame placement while the OE software executes the calibration routine
• Remote Expert: Cloud-based access to qualified technicians and OE software for vehicles requiring OEM-level authorization to complete calibration

Pre/Post-Scan Reporting and Documentation

• Pre-scan: Captures all existing DTCs and safety/convenience system status before calibration begins ÔÇö establishing the baseline your shop needs for insurance and liability documentation
• Post-scan: Confirms every OEM-required calibration was completed to specification with all faults addressed ÔÇö the deliverable insurers, customers, and shop records require
• Validated target position reporting logs every target placement step with a Go/No-Go confirmation ÔÇö the system blocks advancement if any element falls outside of specification
• Autel’s documentation package is engineered to satisfy insurer requirements and support sublet billing, making it more comprehensive than most competing platforms

What’s in the Box ÔÇö IA1000TDT Package

• IA1000 calibration frame with full accessory set
• MaxiSYS Ultra S2 diagnostic tablet
• ADAS software activation card
• Digital Target Activation Card
• Three digital target display monitors
• Wheel clamp targets and alignment hardware
• Required cables and mounting hardware

Note: Physical LDW target boards for make/model-specific static calibrations requiring printed patterns are not included in this package. If your shop volume includes significant work on vehicles that require physical LDW targets ÔÇö Mercedes-Benz, Nissan, Toyota, Subaru, VW/Audi, Hyundai/Kia, Mazda, Mitsubishi, Alfa Romeo ÔÇö contact ADAS Calibration Tools to discuss the IA1000LDWTDT or IA1000ASTDT packages. We’ll give you an honest read on which configuration fits your actual vehicle mix.

IA1000 Package Lineup ÔÇö Where This Fits

• IA1000 / IA1000T ÔÇö Frame only, no targets. Separate tablet purchase required. Entry point for shops adding a frame to an existing Ultra S2.
• IA1000DT / IA1000TDT (this package) ÔÇö Frame + Ultra S2 + Digital Targets. Right for shops whose covered procedures are well-served by digital targets without physical LDW boards.
• IA1000LDWT / IA1000LDWTDT ÔÇö Adds a physical LDW target set for make/model coverage that requires printed patterns.
• IA1000AST / IA1000ASTDT ÔÇö All Systems: frame + LDW targets + radar + lidar + night vision calibration equipment. Maximum coverage for high-volume calibration centers.

Who Needs This System

• Collision repair shops performing daily windshield replacements, front-end work, and camera/sensor R&R ÔÇö for insurer-facing shops, the pre/post documentation package alone justifies the investment
• ADAS calibration centers looking to run alignment and calibration under one roof, on one system, generating one unified report
• Automotive dealerships managing warranty and customer-pay ADAS work across a wide vehicle mix
• Wheel and tire dealers expanding their service offering into alignment and camera recalibration

Why Buy From ADAS Calibration Tools?

• Autel specialists ÔÇö we’ve sold and supported the complete Autel ADAS lineup from the original CSC frame through the IA900 and IA1000 series
• Free shipping on this order ÔÇö a system this size ships freight, and we handle all the coordination
• Free tech support at 800-123-4567 ÔÇö call before you buy to confirm this package fits your shop’s vehicle mix, and call after for setup assistance
• Full manufacturer warranty honored through us ÔÇö you won’t be navigating warranty claims on your own
• Straightforward upgrade guidance: if the All Systems package is genuinely the better fit for your operation, we’ll say so ÔÇö and if this package covers your work, we won’t push you into equipment you don’t need

Call 800-123-4567 for quick answers and help!