Launch Tech USA Nissan Around View Monitoring 2 Target Mat ADAS

Description

Launch Tech USA Nissan Around View Monitoring 2 Target Mat ÔÇö ADAS Calibration Accessory for Nissan AVM Systems

Any shop performing work on Nissan vehicles that disturbs Around View Monitoring cameras ÔÇö whether that’s mirror replacement, panel work, windshield service, or suspension and alignment repairs ÔÇö must use the correct brand-specific calibration target to complete the procedure properly. The LAU301250036 is the Nissan Around View Monitoring 2 Target Mat, a vehicle-brand-specific calibration accessory engineered to function within the Launch X-431 ADAS calibration ecosystem.

Nissan’s AVM system relies on multiple wide-angle cameras ÔÇö typically four ÔÇö positioned at the front, rear, and sides of the vehicle to construct a seamless bird’s-eye composite image. Following any disturbance or replacement of these cameras, a static calibration using the appropriate target pattern is mandatory. Attempting the procedure with a generic mat ÔÇö or bypassing calibration entirely ÔÇö leaves the composite image misaligned, resulting in seam artifacts, distorted overlays, or an active system fault. This mat resolves that issue for Nissan AVM 2 applications specifically.

What This Target Mat Does

• Vehicle-Specific Pattern: Printed with the precise calibration pattern required by Nissan’s Around View Monitoring 2 system. The pattern geometry corresponds directly to Nissan’s OEM calibration specification ÔÇö not a universal or approximate substitute.
• Static Calibration Support: Used during static ADAS calibration procedures. The mat is positioned around the vehicle according to the X-431 ADAS software’s guided setup, which defines exact placement distance and orientation for the technician.
• Part of the Launch LAC/AVM Ecosystem: Built to integrate with the Launch X-431 ADAS frame and calibration software. The software leads the technician through correct positioning, then communicates with the vehicle to execute and verify the calibration.
• Durable Printed Surface: The mat must remain completely flat and hold its pattern with precision ÔÇö any distortion or folding undermines the calibration result. For specific dimension or storage requirements, contact us prior to ordering; exact material and size specs are available on request.

When Is This Mat Required?

• Side Mirror Replacement: Numerous Nissan AVM configurations mount one or more cameras within the mirror housing. Any mirror removal and replacement that affects camera aim demands post-repair calibration.
• Rear Camera Work: Tailgate or rear bumper repairs that disturb the rear AVM camera trigger a calibration requirement.
• Front Camera or Bumper Work: Front fascia replacement or any service performed near the front AVM camera necessitates recalibration.
• Wheel Alignment or Suspension Repairs: Adjustments to ride height or corner geometry alter camera aim angles and may require AVM recalibration in accordance with Nissan’s procedures.
• Any ADAS Reset or Reinitialize: If the AVM system has been reset through a scan tool, calibration using the correct target mat is required before the vehicle is returned to the customer.

Nissan AVM System Coverage

This mat is designed specifically for Nissan’s Around View Monitoring 2 system. Precise model-year coverage depends on which Nissan platforms were equipped with AVM 2 ÔÇö this varies by trim level and market. If you are uncertain whether a particular Nissan model and year uses AVM 2 versus an earlier or later revision, reach out before placing your order. Using a mat from the wrong generation will produce a failed calibration.

Shops that service multiple generations of Nissan AVM systems, or that also work on Infiniti vehicles ÔÇö which share platform architecture with Nissan ÔÇö may require additional target mats. Contact us and we can help identify the complete set your shop needs.

Required Equipment

This mat is not a standalone calibration kit. Completing the calibration procedure also requires:

• Launch X-431 ADAS Calibration Frame ÔÇö the primary frame with adjustment columns and target mounting hardware
• Launch X-431 ADAS Software ÔÇö guides the full procedure and communicates with the vehicle ECU
• Compatible Launch Scan Tool ÔÇö the X-431 Throttle Professional or equivalent device with ADAS software capability
• Wheel Clamps and Alignment Targets ÔÇö for accurate frame positioning relative to the vehicle

If you’re establishing a new ADAS calibration capability and haven’t yet acquired the frame and scan tool, give us a call. We’ll help you determine the right configuration based on your shop’s vehicle mix and budget.

Why Buy From ADAS Calibration Tools?

• ADAS Specialists: We’ve sold and supported Launch ADAS systems across hundreds of shops. We know which mats pair with which systems and which configurations genuinely cover your vehicle mix.
• Free Shipping: Every order ships free ÔÇö no surprise freight charges tacked onto accessory purchases.
• Free Technical Support: Call 800-123-4567 with questions about compatibility, calibration procedures, or which additional mats your shop requires. We answer.
• Full Manufacturer Warranty: Covered under Launch Tech USA’s standard warranty. Any defects are handled directly through us.
• Honest Guidance: If this mat isn’t the right fit for your application, we’ll tell you upfront. We’d rather forgo a $247 sale than ship you the wrong part.

Call 800-123-4567 for quick answers and help!