Bosch Nissan & Infiniti Target Boards (CTA218)

Description

Bosch CTA218 Nissan and Infiniti ADAS Target Boards for DAS 3000

If your shop services Nissan or Infiniti vehicles and regularly performs windshield replacements, front camera removals, or front-end suspension repairs, you’re well aware that ADAS recalibration has become a non-negotiable part of the job. The Bosch CTA218 is a vehicle-specific calibration target board set built for use with the Bosch DAS 3000 ADAS recalibration fixture. These boards are a prerequisite for static camera calibration on Nissan and Infiniti platforms ÔÇö skip the calibration step, and you’re handing keys back to a driver whose lane-departure warning, automatic emergency braking, or forward-collision detection may not be operating as designed.

What the CTA218 Target Boards Do

Static ADAS calibration depends on placing a target board at a precisely defined distance and angle in front of the vehicle. The DAS 3000 frame holds the boards in that exact position while the Bosch ADS 525X or ADS 625X scan tool walks the technician through each step of the recalibration sequence. The CTA218 boards are purpose-built for Nissan and Infiniti camera systems ÔÇö the pattern geometry, physical dimensions, and surface reflectivity are all matched to what those vehicles’ forward-facing cameras need to see during the calibration process. A generic or mismatched target board will result in a failed calibration or an inaccurate one, neither of which is acceptable on a safety-critical system.

When You Need These Boards

• Windshield replacement: Any windshield R&R on a Nissan or Infiniti with a forward-facing camera mounted to the glass requires post-installation camera recalibration before the vehicle is returned to the customer.
• Camera removal or reinstall: Recalibration is required any time the camera unit, its mounting bracket, or associated hardware has been disturbed.
• Front-end collision repair: Bumper cover removal, radiator support repairs, or any work that could affect the relationship between the camera and the vehicle centerline will trigger a recalibration requirement.
• Suspension alignment work: Select Nissan and Infiniti models call for camera recalibration following alignment corrections that alter the vehicle’s thrust angle.

Compatible With the Bosch DAS 3000 System

The CTA218 boards are designed to mount directly onto the Bosch DAS 3000 recalibration frame. The DAS 3000 relies on wheel-hub alignment markers and floor positioning guides ÔÇö working in conjunction with on-screen guidance from the paired scan tool ÔÇö to position the frame and target boards at the correct distance and angle for each specific vehicle. This structured, guided workflow eliminates setup guesswork and minimizes the risk of technician error during a procedure that carries real safety consequences.

Precise fixture placement is further supported by the Bosch ADAS Positioning (BAP) system, which is integrated into the DAS 3000 platform. For shops already operating Bosch ADS scan tools alongside the DAS 3000 frame, the CTA218 is the key addition that opens up static calibration capability for Nissan and Infiniti vehicles.

Which Vehicles These Cover

The CTA218 boards are designed for Nissan and Infiniti models equipped with forward-facing ADAS cameras that call for static target-board calibration. Specific model-year coverage and system compatibility are confirmed through the Bosch ADAS software paired with your ADS 525X or ADS 625X scan tool. If you need a coverage check on a particular vehicle before committing to a purchase, contact ADAS Calibration Tools and we’ll look it up for you.

What’s in the Box

• Nissan and Infiniti-specific ADAS calibration target boards (CTA218 set)
• Compatible with Bosch DAS 3000 recalibration frame
• For use with Bosch ADS 525X and ADS 625X scan tools

Buying Consideration: CTA Boards vs. Full System

The CTA218 is an accessory component of the DAS 3000 system ÔÇö it is not a standalone calibration tool and cannot function independently. Shops that do not yet have a DAS 3000 frame and a compatible Bosch scan tool will need those as the foundation first. For shops already running the DAS 3000 that want to extend their coverage to Nissan and Infiniti, the CTA218 is a direct, no-complication add-on at $599.99. If you’re in the process of building out a comprehensive multi-brand ADAS calibration capability, ADAS Calibration Tools can help you map out which CTA board sets align with the vehicles your shop sees most often.

Why Buy From ADAS Calibration Tools?

ADAS Calibration Tools specializes in professional-grade diagnostic and calibration equipment for automotive shops. We stock the full range of Bosch ADAS tools and accessories ÔÇö including the complete DAS 3000 ecosystem ÔÇö and our team is equipped to help you identify the right configuration for your shop’s specific vehicle mix. Every order ships free, and each purchase is backed by the full manufacturer warranty along with complimentary pre- and post-sale technical support. We’re not here to sell you equipment that doesn’t fit your workflow ÔÇö if a different setup makes more sense for your operation, we’ll say so.