Description
Autel ADAS Calibration Set ÔÇö Package 3 (Without Scan Tool)
The Autel ADAS Calibration Set Package 3 (SKU: AUADASCOMPLETE) represents Autel’s complete static ADAS calibration frame and target solution, offered without a diagnostic tablet. This configuration is purpose-built for shops that already have a MaxiSYS Ultra, MS909, MS919, or Elite II in service and simply need the hardware side of the ADAS equation. Whether your operation handles windshield replacements, front-end repairs, or camera and radar R&R, this calibration rig is what turns that work into a billable, documentable service.
Understanding ADAS Calibration and Its Importance
Today’s vehicles depend on precise recalibration of forward-facing cameras, adaptive cruise control radar, blind-spot monitors, surround-view systems, and night vision sensors whenever a windshield is replaced, a front-end component is disturbed, or suspension geometry is altered. Skip the calibration and those systems either set codes or ÔÇö far more dangerously ÔÇö continue operating with reduced accuracy the driver has no way to detect until something fails. Whoever last worked on the vehicle carries the liability.
Autel supports two calibration modes: static calibration (target-based, completed in the shop) and dynamic calibration (a road-drive procedure). Package 3 is centered on the static target workflow, which covers the large majority of procedures most shops encounter day to day.
What’s Included in Package 3
- CSC (Calibration Standard Component) Frame ÔÇö Autel’s vehicle-positioning calibration frame, height- and width-adjustable to accommodate passenger cars through light commercial vehicles
- Full target panel set ÔÇö vehicle-specific calibration targets for front camera, radar, night vision, and AVM (surround-view) procedures
- Calibration accessories kit ÔÇö alignment rulers, positioning guides, and all required hardware for accurate frame setup per vehicle
- Carry and storage cases ÔÇö targets and frame components arrive in protective cases that double as job-to-job storage solutions
Note: This package does NOT include a MaxiSYS diagnostic tablet. If you’d prefer a bundled configuration, ADAS Calibration Tools can put together a package with the MS909, MS919, or Ultra based on your workflow. If you already own one of those tablets with an active ADAS software license, Package 3 is precisely what you’re looking for.
Compatible Autel Tablets
Package 3 is designed to work alongside any of the following MaxiSYS tablets running Autel ADAS software:
- MaxiSYS Ultra ÔÇö flagship tablet featuring an integrated oscilloscope and full OE-level diagnostic capability
- MaxiSYS MS919 ÔÇö mid-to-high tier platform with integrated scope functionality
- MaxiSYS MS909 ÔÇö comprehensive diagnostics without an integrated scope; the most common ADAS pairing found in independent shops
- MaxiSYS Elite II ÔÇö previous-generation platform, still fully supported across all ADAS calibration procedures
With an active ADAS software subscription, your tablet manages the entire calibration workflow from start to finish ÔÇö vehicle selection, target positioning guidance, live camera feed during alignment, pass/fail confirmation, and a printed calibration report for your records.
Systems This Rig Calibrates
- Forward-facing cameras ÔÇö lane departure warning (LDW), lane keep assist (LKA), forward collision warning (FCW), automatic emergency braking (AEB)
- Adaptive cruise control radar ÔÇö front radar units, both long-range and mid-range variants
- Night vision systems ÔÇö infrared camera calibration where supported by the vehicle OEM
- Surround-view / AVM systems ÔÇö 360-degree camera calibration requiring all four cameras to be referenced to a unified plane
- Blind-spot monitoring ÔÇö rear and side radar calibration on supported platforms
Which Shop Is This Configuration For?
At $12,858.75, Package 3 is engineered for operations that have already invested in Autel diagnostics and want to add ADAS calibration as a revenue-generating service without purchasing a second tablet:
- Independent repair shops already running the MS909 or MS919 for diagnostics who are currently turning away or subcontracting ADAS jobs
- Auto glass specialists needing in-house calibration capability following windshield installs ÔÇö the CSC frame handles the static procedures that glass shops run on a daily basis
- Collision repair centers where a diagnostic tablet is already on the floor and ADAS calibration is the missing piece of the service offering
- Multi-bay shops looking to establish a dedicated ADAS station independent from their existing diagnostic bay
If you don’t yet have an Autel MaxiSYS tablet, ADAS Calibration Tools offers bundles that include the MS909 or MS919 ÔÇö reach out and we’ll identify the right configuration for your vehicle mix and service volume.
Space and Setup Requirements
Performing static ADAS calibration requires a level floor area with sufficient clearance in front of the vehicle to position the target frame. Vehicle-to-target distances vary by make, model, and the specific system being calibrated ÔÇö Autel’s software provides step-by-step positioning instructions for each individual procedure. If you have any uncertainty about whether your shop floor will meet the requirements, contact ADAS Calibration Tools before placing your order and we’ll walk through everything with you.
Why Buy From ADAS Calibration Tools?
- Authorized Autel dealer ÔÇö deep familiarity with the full product line means honest, knowledgeable guidance on which configuration actually fits your shop
- Free ground shipping included on this order
- Free tech support at 800-123-4567 ÔÇö answered by staff who understand ADAS calibration workflows, not a generalist call center
- Full manufacturer warranty covering every component in this package
- Straightforward upgrade guidance ÔÇö if Package 3 isn’t the right fit for your operation, we’ll tell you before you order
Call 800-123-4567 for fast answers and expert configuration help!
Reviews
There are no reviews yet.